Related Manuals for Flextool FDU-D2
Summary of Contents for Flextool FDU-D2
- Page 1 OPERATING INSTRUCTIONS FLEXTOOL DRIVE UNITS (DIESEL MODELS) ® FDU-D2 & FDU-DE2 Version 1.0 (December 2021) FOR MORE INFORMATION CONTACT US ON 1300 353 986 OR VISIT flextool.com.au...
- Page 2 FLEXTOOL OPERATING INSTRUCTIONS DIESEL DRIVE UNIT FDU SERIES CONTENTS MOTOR The motor is controlled by a throttle lever mounted on the motor Introduction below the fuel tank. Applications To STOP the machine TURN the throttle lever to the STOP position.
-
Page 3: Operation
FLEXTOOL OPERATING INSTRUCTIONS DIESEL DRIVE UNIT FDU SERIES OPERATION For information on correct starting procedures refer to the engine manufacturers operation manual. Before engaging the flexshaft with a diesel drive unit start the motor using the recoil starter, increase the speed to full throttle and allow it to warm up for a few minutes. -
Page 4: Troubleshooting
FLEXTOOL OPERATING INSTRUCTIONS DIESEL DRIVE UNIT FDU SERIES Operating Engine Vibration Max Rated Weight Speed Isolating Lifting Engine Engine Power Fuel Product Model (kg) (rpm) Mounts Hook Make Model (Hp) Type Code Barcode FT201800 FDU-D2 (Diesel) 3000 Yanmar -UNIT 9300611599445... - Page 5 Design and technical specifications may be subject to changes. © This publication is copyright. All rights are reserved. Flextool is a registered trade mark and TuffTruk is a trade mark of Parchem Construction Supplies Pty Ltd. FOR MORE INFORMATION...
Need help?
Do you have a question about the FDU-D2 and is the answer not in the manual?
Questions and answers