Setup; Ac Plug - Rasha RP-1500 Quick User Manual

SETUP

Power Supply



AC Plug

Connection
AC Live
AC Neutral
AC Ground
If you are not familiar with or need more information about DMX standards, Master/Slave connectivity,
or the DMX cables needed to link this product to a DMX controller, download the DMX Handbook from
the Rasha website: www.rashaprofessional.com
Each RP-1500 has an auto-ranging power supply that works with an
input voltage range of 100 to 240 VAC, 50/60 Hz. To determine the power
requirements for each
You can also refer to the Technical Specifications chart in this manual.
The listed current rating indicates the maximum current draw during
normal operation. For more information, you may download Sizing Circuit
Breakers from the Rasha website: www.rashaprofessional.com
Always connect this product to a protected circuit with an appropriate
electrical ground to avoid the risk of electrocution or fire. To eliminate
unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
Never connect this product to a rheostat (variable resistor) or dimmer circuit,
even if the rheostat or dimmer channel serves only as a 0 to 100% switch.
The RP-1500 comes with a power input cord terminated with a Neutrik
powerCON A connector on one end and an Edison plug on the other end
®
(U.S. market). If the power input cord that came with your product has no
plug, or if you need to change the Edison plug, use the table below to wire
the new plug.
Wire (U.S.)
Black
White
Green/Yellow
Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507
rashaprofessional .com
RP-1500 refer to the label affixed to the product.
Wire (Europe)
Brown
Blue
Green/Yellow
8
|
951-654-3585
|
info@rashaprofessional.com
®
Screw Color
Yellow or Brass
Silver
Green