Setting The Flash Exposure Compensation; Setting The Flash Output - Canon PowerShot SX200 IS User Manual

Setting the Flash Exposure Compensation

Just like with exposure compensation (p. 76), you can adjust the exposure
±2 stops in 1/3-stop increments when using the flash.
In M and B shooting modes, set [Flash Mode] to [Auto] in advance (p. 97).
•
•
You can also set the flash exposure compensation by pressing the
n button. Select [Flash Settings] from the 4 tab, then press the
m button. Use the qr buttons to make the setting.

Setting the Flash Output

You can select 3 levels of flash output.
In M and B shooting modes, set [Flash Mode] to [Manual] in
•
advance (p. 97).
You can also set the flash output by pressing the n button. Select
•
[Flash Settings] from the 4 tab, then press the m button. Use the qr
buttons to make the setting.
98
Select the flash exposure
compensation.
Press the m button and select
●
press the m button again.
Make the setting.
Press the op buttons or turn the  dial
●
to select the flash exposure
compensation, then press the m button.
Set the camera to h (p. 70).
Select the flash output.
Press the m button and select
●
press the m button again.
Make the Setting.
Press the op buttons or turn the  dial
●
to select flash output, then press the m
button.
, then
, then