Hasbro DOWNSPIN C1641 Quick Start Manual

CONTENTS
launcher
chute
THE FIRST TIME YOU PLAY
1.
Carefully twist the keys to
remove them from the unit.
If needed, use an emery
board or sandpaper to
remove any excess plastic.
2.
Insert the DOWNSPIN
unit into the chute. Slide
unit back until it locks into
place.
3.
Attach the launcher to the
top of the DOWNSPIN
unit and push down until it
C16410000_DOWNSPIN_IE.indd 1
5 "A" gears
DOWNSPIN unit
clicks into place.
4.
Insert the "A" gears into the
"A" side of the DOWNSPIN
unit, making sure to match
the numbers on the gears
with the numbers on the unit.
Push the gears in until they
5B
click into place.
5.
Insert the "B" gears into the
"B" side of the unit, making
sure to line up the notches on
the inside of the gears so the
gears slide all the way into
the slots. (The "B" gears will
not click into place.)
6.
Carefully remove the tokens from the plastic frames. If needed, use
an emery board or sandpaper to remove excess plastic from the
tokens. Discard the frames after removing the tokens.
AGES
7
™
ADULT ASSEMBLY
OBJECT
Be the first player to get
all of your tokens down
through the gears and into
your chute. But be careful!
Every time you turn a gear,
you might also be helping
your opponent!
20 tokens and
plastic token bag
5 "B" gears
+
2
PLAYERS
REQUIRED.
C1641
2 keys
11/7/16 11:07 AM