How To Clean And Store - Hamilton Beach 74251 Read Before Use

How to Assemble and Use
is not in use. Blades are extremely sharp. Always handle by
side opposite cutting edge, as illustrated.
1. If Blades are separated, pick up by Plastic Guard. Slide
rivet on one Blade into keyhole slot in other Blade until
they are locked together.
2. Holding Blades together
at base of Blade with
cutting edge down, slide
onto motor housing
until both Blades click
into place.
3. Plug into outlet.
4. Hold Knife by Handle.
Pull ON/OFF Switch like
a trigger to operate. You
must hold ON Switch
for Knife to operate.
5. To stop, release ON/OFF Switch.
Tip for Crusty Bread: Place bread on a cutting board. While
holding bread with one hand, place knife on top of bread
and score a line where you will make the cut. Pull Switch
to ON and hold while gently moving knife back and forth to
cut through crust.

How To Clean and Store

WARNING
disconnect cord from electric outlet before inserting,
removing or cleaning blades. Blades are sharp; handle
carefully.
1. Unplug.
To reduce risk of personal injury, always
(cont.)
Click
5
Click