Canon PowerShot D10 User Manual page 138

Changing the Start-up Image or Sound
Changing the Start-up Screen
Setting a Recorded Image as the Start-up
Screen Image
When you press the 1 button and set the camera to playback mode, you
can register sounds and images.
Any previously registered start-up image will be overwritten when
registering a new start-up image.
Using the included software to register sounds and the
start-up screen image
You can register sounds and start-up screen images that come with the included
software to the camera. Refer to the Software Starter Guide for details.
138
Select [Start-up Image], then press the m
●
button.
Press the qr buttons to change the image.
●
No start-up image.
1 Preset image.
You can register images that you have
2
taken.
Select [Start-up Image], then press the m
●
button.
Press the qr buttons to select [2], then
●
press the m button.
Press the qr buttons to select an image,
●
then press the m button.
Press the qr buttons to select [OK], then
●
press the m button to complete
registration.