Table of Contents
Advertisement
6
A situation is possible when tilts to North and South give very similar results both by value and by
sign and vertical position reads "0". For example, tilt to the North gives a reading of +5, vertical
reading is 0, and tilt to the South +4. Processor cannot improve the tuning with such data. In such
cases instead of two tilts – one to the North and one to the South, tilt only to the North or only to
the South and instead of the second tilt hold the device vertically. The processor will calculate
between one tilt and "0" and improve the result.
7
Check balancing by tilting the device to the North and the South. A well-tuned balance is when tilts
of 3-5 degrees do not surpass +-1-2 units.
8
After you are done with balancing, return to "Menu", choose "Save Parameters", and save current
balancing by pressing "OK". Switch back to "Operation" or continue tunings my moving on to
alignment.
Advertisement
Table of Contents
