Advertisement
2
PIECES
3
PIECES
ECONO-1614 — 03 /22 — A4
C
]
For each cup, push the
hood of the cup down
onto its base.
Slide the cup doors
up to open and insert
the cups.
R
]
Center the roof on the cage.
Catch the right side roof panel under
the hooked wires on the side panel.
2
Along the front and back panel
roof lines, catch the outer wires of
the roof onto the extended hooks.
Finish by catching the left side under
the side panel hooks.
For more wonderful cages, toys, and accessories for cats, birds, chickens, rabbits, ferrets, dogs and small animals, visit www.prevuepet.com
2
Assembly completed.
Unfold the cage body mesh.
Set the cage body into the base, inserting
the wire bump-outs into the openings
along the rim of the base.
Along the back rim of the base, position
the bottom wire between the outer base
wall and the inner raised tab.
Insert the perches on
horizontal wires from
side-to-side across the
cage at an even height.
Advertisement
