Page 2
¨ Cover your drain to prevent loss of parts ¨ Observed any local plumbing codes ¨ Inspect fixture for damage - Replace as necessary * Dura Faucet reserves the right to make any revisions in the design of products without notice.
Page 3
INSTALLATION OF THE FAUCET New Faucet Preparation First, shut off the water supply and remove the old faucet by disconnecting it from the supply lines under the sink, and unscrewing the faucet from the countertop by removing mounting nuts. Next, clean the sink’s top surface in preparation for the new faucet. Fasten Deck Plate (Optional) The base plate can be used without a sealant, but if desired apply plumber’s putty or other suitable sealant to the bottom edges of the base plate (optional).
Page 4
30 to 60 seconds each. While water is running, check for leaks around and under the sink. Once done replace aerator and start enjoying your new Dura Faucet.
Page 6
Defects or damages caused by the use of other products or parts is not covered by this warranty. If repair or replacement is not practical, Dura Faucet may elect to refund the purchase price in exchange for the return of the product.
Need help?
Do you have a question about the DF-NMK531 and is the answer not in the manual?
Questions and answers