Canon PowerShot A810 User Manual page 96

Shooting Range and Focusing
• [Servo AF] (p. 97) is set to [On] and cannot be changed.
• Tracking may not be possible when subjects are too small or move
too rapidly, or when subject color or brightness matches that of the
background too closely.
[AF-Point Zoom] on the 4 tab is not available.
•
e and u are not available.
•
• The camera can detect subjects even if you press the shutter button halfway
without pressing the q button. After your shot,
the screen.
96
Choose a subject to focus on.
Aim the camera so that
subject, and then press the q button.
When the subject is detected, the camera
beeps and is displayed. Even if the
subject moves, the camera will continue to
track the subject within a certain range.
If no subject is detected,
To cancel tracking, press the q button again.
Shoot.
Press the shutter button halfway.
changes to a blue
subject as the camera continues to adjust the
focus and exposure (Servo AF) (p. 97).
Press the shutter button all the way down to
shoot.
Even after your shot,
the camera continues to track the subject.
is on the desired
is displayed.
, which follows the
is still displayed and
is displayed in the center of