Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Perma Pure O2asis
Summary of Contents for Perma Pure O2asis
- Page 1 Personal Humidifier USER GUIDE PP-19-1 REV. 15...
- Page 2 Please contact your care provider, licensed distributor, or Perma Pure if you have trouble setting up or using the O2asis device. Should you need to contact Perma Pure directly, please use the O2asis™ is a registered trademark of Perma Pure, LLC.
-
Page 3: Table Of Contents
CONTENTS Included with the System ....... . 6 Regular Cleaning ........18 Device Overview and Features . - Page 4 This could damage the device or cause air leaks. The O2asis Humidifier is a device intended to add moisture to breathing gases before they reach • Always route the power cord in a way that will avoid anyone tripping or anything otherwise the patient to aid in the comfort of oxygen therapy.
- Page 5 Contact your the parts and accessories used to connect to the patient before use. care provider, licensed distributor, or O2asis Customer Service for repair or replacement. • The included cannula is validated for use with this device.
-
Page 6: Included With The System
NOTE: If any of the items listed above are missing or damaged, please contact Do not use if package is open or Instructions for Use your care provider, licensed distributor, or O2asis Customer Service. damaged DEVICE OVERVIEW AND FEATURES Non sterile... -
Page 7: Features
FEATURES asis Base Unit — The base of the humidifier that includes the heat con- trol buttons and the connection to the power plug. asis Water Well Consumable Cartridge — The top cartridge that in- cludes the water reservoir and heated line. -
Page 8: Safety Features
SAFETY FEATURES SETTING UP THE DEVICE Place the device on a firm, flat surface within easy reach of where you will use The O asis Humidifier has been designed with the following safety features to Do not place the device near any sources of heating or cooling such as limit temperature, power currents, and to cut off power of the device to ensure fire places, radiators, air conditioners, or forced air vents. -
Page 9: Color-Coded Port Connections For The Water Fill Pump
Do not overfill the water reservoir. Use only the included Water Fill Pump to fill the device. Warning: The Water Fill Pump is only intended for use with the O2asis Obtain a one-gallon bottle or jug of distilled water (available at many Humidifier. - Page 10 The first time using the Water Fill Pump: Slowly push down on the water fill pump handle 5 times to fill the Water Well. As needed, remove Water Well to visually check water Hold the pump collar in one hand. Use the other hand level, see section Checking for an empty Water Well, to twist pump head COUNTER-CLOCKWISE.
-
Page 11: Powering The Device
Immediately discontinue use and replace if damaged To connect the device to AC power, complete the following steps: Contact your care provider, licensed distributor, or O2asis Customer Service for replacement. Ensure the blue latch is closed. -
Page 12: Color-Coded Port Connections For The Oxygen Hose
Note: Color-Coded Port Connections for the Oxygen Hose heated line The table below includes an image of the green color-coded O2asis Humidifier Oxygen Connection Port. Port Label and an image of the Color-Coded Port Connections Position cannula on face as directed by your care provider. -
Page 13: Adjusting The Heat Level
O2asis tubing within the The heat level can be adjusted by pressing the ‘+’ and ‘-‘ buttons on heating tube and cartridge may also be contaminated. -
Page 14: Pediatric Patients
USE WITHOUT ELECTRICAL POWER Setup and use for pediatric patients are consistent with all other instructions The O2asis Humidifier will continue to provide humidity even when disconnect- within this manual, except as follows: ed from the power supply. For use without power, simply unplug the power... -
Page 15: Replacing The Water Well Consumable Cartridge
REPLACING THE WATER WELL To replace the Water Well consumable cartridge, complete the following steps: CONSUMABLE CARTRIDGE Unplug the power adapter cord from the latch side of the device. What You Will Need Unplug the oxygen source line from the oxygen connector. - Page 16 Lift the latch side of the Water Well consumable Swing the base latch up and snap it onto the cartridge and rotate out of the base. cartridge to lock it in place. Water Well Do not Reverse side of remove water Water Well bladder Fill the Water Well using the Water Fill Pump and distilled water as...
-
Page 17: Checking For An Empty Water Well
CHECKING FOR AN EMPTY WATER WELL Warning: You must replace the Water Well consumable cartridge every 30 days to ensure device safety and performance. Failure to replace the car- tridge can result in degraded device performance and risk of serious patient Remove connections: injury. -
Page 18: Cleaning And Disinfection
CLEANING AND DISINFECTION Check Water in Water Well: If low or empty, refill water well. Regular Cleaning Clean the device periodically and when dirt or debris is visible on the out- side of the device. To clean the device base, disposable cartridge, or water fill pump, use a lint free cloth dampened with water and a few drops of dish soap. -
Page 19: Reprocessing And Disinfection Between Patients
General Purpose Disinfectant under Product Code (LRJ). Allow the device to air dry completely. If Power Supply is exposed to the patient, disconnect from the O2asis device and wall. Repeat steps 4 through 6, and let thoroughly dry. asis User Guide... -
Page 20: Moving The Device
MOVING THE DEVICE TECHNICAL SPECIFICATIONS To move the device to a new location, it is recommended that the power Physical adapter plug be disconnected from the humidifier base. When moving with the device, make sure to secure the unit and route the tubing such that you will not Dimensions . -
Page 21: Electrical
Electrical Standards Classification The device shall only receive power from the included Globtek GMTM46402- • This device is an US FDA cleared Class II medical device. 3612 power supply. • This device is considered an IEC Class II, continuous operation, ordinary AC Power Input . -
Page 22: Performance
PERFORMANCE ESTIMATED HUMIDIFICATION OUTPUT Startup time to normal use: 30 seconds 20°C Ambient Temp 35°C Ambient Temp Tests automatically performed at startup: Temperature check, sensor check, Dry Oxygen Outlet Outlet Heat Setting consumable present check, last setting check. Outlet Dew Outlet Dew Flow Rate Humidity... -
Page 23: Electromagnetic Compatibility
Warning: The O asis Humidifier should not be used adjacent to or stacked Medium with other equipment. If adjacent or stacked use is necessary, the O2asis Humidifier should be observed to verify normal operation. If operation is High not normal, the O asis Humidifier or the other equipment should be moved. -
Page 24: Emissions
± 2, 4, 8, 15kV air The O2asis Humidifier is intended for use in the electromagnetic environment specified be- 61000-4-2 low. The user of the O2asis Humidifier should assure that it is used in such an environment. Electrical fast tran- ± 2 kV for power... -
Page 25: Disposal
IEC 61000-4-3 3 V/m or hospital settings. care provider, licensed distributor, or O2asis to 80 MHz to 10 V/m return the device. 2.5 GHz asis User Guide... - Page 26 O2asis to return the device. or O2asis to return the device. er or cooler. The air flow The connection...
- Page 27 If any of these problems occur again after you perform all suggested actions, dry. with regular or such that it is not providing comfort anymore, contact the care provider, licensed distributor, or O2asis for customer service. filtered tap water. please purchase a new Water Well to restore full comfort.
- Page 28 1001 New Hampshire Ave Lakewood, NJ 08701 USA Toll Free: 1-800-337-3762 www.o2asishumidifier.com...
Need help?
Do you have a question about the O2asis and is the answer not in the manual?
Questions and answers