Vigitron MaxiiView Vi00022 User Manual

Wireless IP Camera Installation and PoE Test Tool User Manual
Vigitron's patent pending Vi00022 wireless camera setup tool offers a fast
and reliable method for focusing and adjusting the view of IP cameras in the
field. The connected IP camera image is transmitted through WiFi connec-
tion allowing for quick in-field view of image.
The Vi00022 is platform independent and provides the ability to view IP
camera imge on smart phones, tablets or computers operating with Android,
iOS, or Windows platforms by entering the connected device's user name
TM
and password.
It also provides digital read out of real time PoE voltage and power at the
input of the camera taking the guess-work out of installation. The Vi00022
can be connected to any PoE device to view voltage and power at the
device input. It is very compact and light that can easily fit in pocket or
mounted on the installers belt using its built in belt-clip.
The Vi00022 does not need local power source and uses only PoE power
from the network to power itself and the connected camera.
The Vi00022 is an ideal IP camera installation or debugging tool that saves
time and money in installation of IP cameras.
Important Safety Warning
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Use in accordance with the manufacturer's instructions.
- To reduce the risk of fire or electrical shock, do not expose these products
to rain, moisture, dripping or splashing.
- No objects filled with liquids, such as vases, shall be placed on Vigitron
equipment.
- DO NOT install the unit in a place where the operating ambient tempera
ture exceeds 75° C.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long
periods of time.
- Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as a power
supply cord or plug is damaged, liquid has been spilled, or objects have
fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
- The network cable is used as the disconnect device and shall remain
readily operable.
RISK OF ELECTRIC SHOCK
CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK,
DO NOT REMOVE COVER. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CAUTION
DO NOT OPEN
The Smart Choice for Transmission Solutions
Application Drawing
Providing PoE and WiFi Connection to a Camera
PoE Camera
Data + PoE
328 ft. (100m)
V00022
PoE
328 ft. (100m)
PoE Switch
The Vi00022 enables connecting the PoE cameras to any wireless device using a WiFi connection.
Connecting the camera to a network of wired and wireless devices
PoE Camera
Data + PoE
328 ft. (100m)
V00022
PoE
Data + PoE
328 ft. (100m)
328 ft. (100m)
PoE Switch
The Vi00022 enables connecting to a laptop using a wired connection.
IP Camera-end Installation
- Connect a Cat5/6 network cable to the RJ45 connector of the IP camera.
- Connect the other end of the network cable to Cat5/6 network cable to the
"Camera" port of Vi00022.
Network-end Installation
- Connect the network Cat5/6 cable to the "Network" port of Vi00022.
If the network PoE source is active, it will prower up the Vi00022 and the
connected PoE camera and display PoE power and voltage to the camera.
The data stream will be available on WiFi network of the the Vi00022 and
can be viewed on a smart phone, tablet or laptop.
Wireless Connection Setup
- Open the network or wireless settings on your laptop or mobile device.
• Apple devices: Choose Settings > Wi-Fi
• Android devices: Choose Settings > Wireless & Networks > Wi-Fi
• PC: Enable the wireless connection.
- Select Vi00022-xxxxxx from the list of networks where "xxxxxx" is a unique
value for each device.
- Select the manual button and enter then save an IP Address (with same
subnet as your IP camera) and Subnet Mask that will allow access to the IP
camera.
• This establishes a wireless connection between your WiFi device and
the Vi00022.
- Open the web browser:
• Type in the IP address of the camera on the address bar.
• View camera and operation
- The Blue Status LED on the front panel of Vi00022 should be flashing to
indicate proper connection.
Maxii View
TM
Cat 5/6
www.vigitron.com
Vi00022_UM