Descriptions
Dear users, sincerely thank you for choosing our products. For your convenience of installing and using
this product, please read this manual carefully before use.
Gingerway wireless water leakage sensor is composed of transmitter and probe, it can be installed
on walls which closed to the ground or the surface of others objects. When the proble is submersed
in water or other conductive liquid, the transmitter will immediately hoot and send alarm signal to
SmartC gateway. The battery standby time and reliability are observably improved owes to the ultralow
power consumption technology and two-way wireless communication technology.
This product can be used independently; For network alarm, it must be used with Gingerway SmartC
series of gateways.
Main Features
√ Z-Ginger® full-digital, highly reliable, large coverage, low power consumption internet of things two-
way wireless network
√ Ultralow power consumption, battery life exceed 10 years
√ Corrosion resistant stainless steel probe
√ Probe separatioin design, easy to set up, moisture-proof and not fear water immersion
√ Anti-pet, anti-insect interference
√ Manual testing function
√ Low battery notification
Product Structure Diagram
Front Side
①
②
③
Installation
Mount the transmitter and probe on the wall which closed to the ground or the surface of others objects
with double faced adhesive tape or screws. The probe is about 5mm above the ground.
Wireless Water Leakage Sensor Instruction
Gingerway Technologies Co.,Ltd
Inside of Transmitter
GW-4325
Enjoy the life
④
⑤
CR2450
3V
201708 V1.0
1.Transmitter
2.Indicator
3.Probe
4.Test/Bind Button
5.Cell Holder
Need help?
Do you have a question about the GW-4325 and is the answer not in the manual?
Questions and answers