WARNING
© Copyright 2017 ABB. All rights reserved.
Disassembly and assembly
Removing cartridge group
Turn compressor casing (72000) together with wall insert and diffuser
and put them down with surface (F) on underlay.
Make sure that the underlay does not slip.
Allow compressor casing to rest only on surface (F).
Check underlay and adjust if necessary.
Remove screws (72002).
Remove diffuser (79000) using swivel lifting eyes (90235).
Remove wall insert (77000) using swivel lifting eyes (90235).
Remove O-ring (77005) from wall insert.
Operation Manual / TPL67-C.. - TPL71-C..
8
8.5
Page 98