Related Manuals for purflo PurAir
Summary of Contents for purflo PurAir
- Page 1 PurAir Breathable Crib Assembly Instructions IMPORTANT: Retain for future reference, read before use...
-
Page 2: What's In The Box
Should you have any feedback you think we have missed, that might help other parents, please let us know. What’s in the box? Components check list Instructions on how to build and disassemble your PurAir Breathable Crib Tips on how to care for your PurAir Breathable Crib... -
Page 3: Safety Information
SAFETY INFORMATION IMPORTANT! KEEP FOR FUTURE REFERENCE COMPLIES WITH EN 1130:2019 THE MATTRESS COMPLIES WITH EN 16890:2017 BS7177:2008 WARNING WARNING - Do not use this product without reading the instructions for use first WARNING - Stop using the product as soon as the child can sit or kneel or pull itself up; or has reached 20lbs/9kg whichever comes first WARNING - Placing additional items in the product may cause suffocation WARNING - Do not place the product close to another product, which could present... -
Page 4: Components Checklist
Components checklist Electronic housing requires 3 AA (not included) Tools required: Phillips head screwdriver (not included). Please check the contents of the box against the list above. If anything is missing, please contact us. WARNING: Adult assembly required. Exercise care when unpacking and assembling product. Keep small parts out of child’s reach. -
Page 5: Frame Assembly
Frame assembly STEP 1 STEP 2 Click Click Click Click *Legs should angle in STEP 3 STEP 4 Click *Snap into place Click STEP 5 Match Match * Insert 4 phillips screws (2 per side) Important note: This step is only for assembly purposes. The 4 screws do not need to be removed when dismantling the Crib for travel or storage. - Page 6 Basket assembly to frame STEP 6 STEP 7 Click (10 times) Complete frame Crib assembly STEP 8 STEP 9 Lift top rail Remove mattress STEP 11 STEP 10 STEP 10 Push out support bars Snap (10 times) Snap (10 times) Click (4 times)
- Page 7 Crib assembly STEP 12 STEP 13 Replace mattress STEP 12 Open zip to access the toy bar channel. Ensure Zip is closed when toy bar is removed. Snap (10 times) STEP 14 Complete Crib Baby soothing centre set up BATTERY WARNING: •...
- Page 8 Crib operation Connecting crib to frame When positioning the crib on the frame, ensure that the toy bar is the same end as the vertical legs Click Look for ‘green’ dot IMPORTANT: Always be sure the Crib is properly latched to the frame before use. Pull up on carry handles to be sure the Crib does not separate from the frame.
- Page 9 Using crib separate from frame WARNING: • NEVER use near stairs or steps • Child’s movement can slide Crib. NEVER place Crib near edges of counter tops, tables, or other elevated surfaces • Your Crib can roll over on soft surfaces and suffocate child. NEVER place Crib on beds, sofas or other soft surfaces •...
-
Page 10: Cleaning And Maintenance
Cleaning and maintenance • PurAir Breathable Crib Cover and Storage Basket: Machine washable at 40°C, do not bleach, hang to dry • Mattress Sheet: Machine washable at 40°C, do not bleach, tumble dry low heat • Mattress Pad: Machine washable at 30°C, air dry •... -
Page 11: Radio And Television Interference
Radio and television interference FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Need help?
Do you have a question about the PurAir and is the answer not in the manual?
Questions and answers