Canon Optura Instruction Manual page 41

Using digital faders
Activate the function each time you wish to use it (both before you fade in and
again before you fade out) by pressing the D.FADER button.
The name of the fader is shown in the display when it is activated.
1. Put the camera in record pause mode.
2. Press and hold down the D.FADER button (for about 2 seconds) to
display the fader options on the screen.
3. Scroll through the list to your chosen fader by pressing the
D.FADER button.
• The flashing display changes.
• Alternatively, keep the button pressed down to scroll through the list.
F A D E - T
W I N D O W
4. When you reach your chosen fader stop pressing/release the button
and your chosen fader will be put into the memory.
• The camera automatically exits the fader option screen after a few seconds.
• The name of your chosen fader is shown in the display.
5. Start or stop recording.
• The recording will start or stop with the selected fade.
• Sound and image fade together.
• The display will start flashing again. If you wish to use the fade again, press
the D.FADER button again.
• You can turn the selected fade effect off before you use it by pressing the
D.FADER button again.
M . F A D E
W I P E
E
41