Advertisement
10.0 Specifications
Supply Voltage:
Fuses: F1, F2
Enclosure:
Climatic Class:
Temperature Range:
Operating:
Storage:
Relative Humidity:
Pollution Degree:
Altitude:
Compatible Residual Current
Device Types:
Worst Case Fault Current:
Inputs:
Signal:
RUN/STOP:
Outputs:
Clutch / Brake:
Voltage:
Current:
Regulation:
Meter Signal:
DFP or DFP-2 Reference Voltage:
115vac, +/- 10%, 50/60 Hz, 1.1 amp maximum, sinusoidal
1.6 amp, Littelfuse Part No. 21601.6, or
Wickmann Part No. 19194-053-FS
IP20
3K3 (EN60721)
0° C to 50° C
-30° C to 80° C
5% to 85%
2 (IEC664-1)
0 to 2000 m
A or B (IEC755)
1.6 amp ac
DFP or DFP-2 Potentiometer: 1 to 10 kohm, ¼ watt minimum
Tension Potentiometer: 10 kohm minimum, ¼ watt minimum
Contact closure, 30 ohm maximum, 0.2 vdc maximum
-3 to 90 vdc, full wave, phase controlled
Adjustable in four ranges:
-0.004 to 0.125 adc
-0.008 to 0.25 adc
-0.016 to 0.5 adc
-0.032 to 1.0 adc
< 1% of range
0 to 1 madc, +/-2% into 3 kohm maximum
10v +/-2%, 10 madc maximum
Advertisement
