NEURONIC Neuradiant 1070 Quick Start Manual
Hide thumbs
Also See for Neuradiant 1070:
- User manual (16 pages) ,
- User manual (16 pages) ,
- Get started (2 pages)
Advertisement
Thank you for purchasing the
Neuradiant 1070.
Fitting Guide
Remove the helmet and
components from the
case. Take the velcro
strips from the adhesive
paper and apply onto the
inside of the helmet as
shown in the diagram.
Apply the sponges or
foam headpiece onto the
velcro so the unit is fitted
during use.
Do not place any
on the clear plastic
inside the helmet.
Turning on the Device
Connect the helmet with
the controller, connect the
controller with the first
power adapter.
Connect the controller with
the second power adapter.
After connecting the cables,
you can turn on the device
via the
button
on the top
right.
Bottom View
velcro
Second
Adapter
Velcro
Sponges
Foam
Headpiece
First
Adapter
Advertisement
Table of Contents
Related Manuals for NEURONIC Neuradiant 1070
Summary of Contents for NEURONIC Neuradiant 1070
- Page 1 Thank you for purchasing the Neuradiant 1070. Fitting Guide Bottom View Remove the helmet and components from the case. Take the velcro strips from the adhesive paper and apply onto the inside of the helmet as Velcro shown in the diagram.
- Page 2 Custom Program: To be used when instructed by a clinician. Contact us at team@neuronic.online for more information. It’s recommended to use it morning and evening, just like brushing your teeth! Starting a Program...
Need help?
Do you have a question about the Neuradiant 1070 and is the answer not in the manual?
Questions and answers