Table of Contents
Advertisement
Quick Links
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS,
OBSERVE
THE FOLLOWING:
1. Use this unit only in the manner intended by the manufacturer. If you have questions, contact
the manufacturer at the address or telephone number listed in the warranty.
2. Before servicing or cleaning unit, switch power off at service panel and lock the service
disconnecting means to prevent power from being switched on accidentally. When the service
disconnecting means cannot be locked, securely fasten a prominent warning device, such as a
tag, to the service panel.
3. Installation work and electrical wiring must be done by a qualified person(s) in accordance
with all applicable codes and standards, including fire-rated construction codes and standards.
4. Sufficient air is needed for proper combustion and exhausting of gases through the flue
(chimney) of fuel burning equipment to prevent back drafting. Follow the heating equipment
manufacturer's guideline and safety standards such as those published by the National Fire
Protection Association (NFPA), and the American Society for Heating, Refrigeration and Air
Conditioning Engineers (ASHRAE), and the local code authorities.
5. When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden
utilities.
6. To Reduce The Risk Of Fire Or Electric Shock, Do Not Use This Fan With Any Solid-State
Speed Control Device.
7. This unit must be grounded.
8. Not for Use in Kitchens.
1. For general ventilating use only. Do not use to exhaust hazardous or explosive materials and
vapors.
2. To avoid motor bearing damage and noisy and/or unbalanced impellers, keep drywall spray,
construction dust, etc. off power unit.
3. For residential installations only.
4. Read all instructions before installing or using fan.
5. The motor is permanently lubricated and never needs oiling. If the motor bearings are making
excessive or unusual noises, replace the blower assembly.
MODEL
OFF
READ AND SAVE THESE INSTRUCTIONS
Installer: Leave this manual with the homeowner
Advertisement
Table of Contents
Related Manuals for QuFresh QuF100X
Summary of Contents for QuFresh QuF100X
- Page 1 TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: 1. Use this unit only in the manner intended by the manufacturer. If you have questions, contact the manufacturer at the address or telephone number listed in the warranty. 2.
- Page 2 ASSEMBLY INSTRUCTIONS Preparing the Fan 1. Unpack and remove fan carefully from the carton. Confirm that all pieces are present. 2. Choose the location for your fan so that: a. The intake vent from the outside is placed a minimum of six feet from any other exhaust vent; b.
- Page 3 WARRANTY QuFresh warrants this product to be free from defects in materials and workmanship for a period of one year from the date of purchase. Warranty does not apply to product which fails due to abuse, misuse, incorrect installation or improper maintenance.
- Page 4 OPERATION AND SETTINGS The control board is located in the fan housing: Slide switch for CFM control: 50CFM/80CFM/100CFM constant CFM for each speed. Factory preset for 80 CFM. Slide switch for operating mode: Energy Saving/OFF/ON: Factory preset in Energy Saving mode; Slide Switch in ON mode: 1.
Need help?
Do you have a question about the QuF100X and is the answer not in the manual?
Questions and answers