Advertisement
2. Test:
According to the glass type, set the audio type switch to Tempered or Float/Plate.
Position the tester near the glass (8 m Max. between the detector), and aim the front speaker of the glass break
tester at the detector.
Press the trigger button and the tester will play glass break audio.
The blue LED on the detector will light, indicating the detector is triggered successfully.
Testing in Flex mode:
According to the glass type, set the audio type switch to Tempered or Float/Plate, and set the mode switch to Flex.
Position the tester near the glass (8 m Max. between the detector), and aim the front speaker of the glass break
tester at the detector.
Press the trigger button and the red LED will stay on for 10 seconds. Within the 10 seconds, knock on the table or
glass to produce a low frequency sound. The tester will play glass break audio when the sound is recognized.
The blue LED on the detector will light, indicating the detector is triggered successfully.
2
Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China
Advertisement
