Battery Check - Canon EOS 5D Mark III Instruction Manual

A Shooting with the LCD Monitor
About the Information Display
Each time you press the <B> button, the information display will
change.
AF mode
• d : Live mode
• c : Face detection Live
mode
• f: Quick mode
Shooting mode
Drive mode
White balance
Picture Style
Card for recording/
playback
Flash exposure
compensation
AE lock
Flash-ready
Image-recording quality
Shutter speed
HDR shooting/
Multiple exposures
The histogram can be displayed when [Expo. simulation: Enable] is set
(p.205).
You can display the electronic level by pressing the <B> button (p.60).
Note that if the AF mode is set to [u Live mode] or the camera is connected
to a TV set with an HDMI cable, the electronic level cannot be displayed.
When <g> is displayed in white, it indicates that the Live View image
brightness is close to what the captured image will look like.
If <g> is blinking, it indicates that the Live View image is not being
displayed at the suitable brightness due to low- or bright-light conditions.
However, the actual image recorded will reflect the exposure setting.
If flash is used or bulb is set, the <g> icon and histogram will be
grayed out (for your reference). The histogram may not be properly
displayed in low- or bright-light conditions.
200
Auto Lighting Optimizer
Aperture
Eye-Fi card transmission status
AF point (Live mode)
GPS connection indicator
Highlight tone priority
AEB
ISO speed
Possible shots
Exposure level
Histogram
Digital compass
FEB
Magnification/
Magnifying position
Exposure
simulation

Battery check