Page 2
1. Welcome .........5 8. Support ........26 8.1 FAQ 2. Headset overview ......6 8.2 How to care for your headset 2.1 BlueParrott B650-XT 8.3 How to clean your headset 2.2 BlueParrott S650-XT 2.3 Included accessories 3. How to wear ........9 3.1 Switch from stereo to mono sound...
1. Welcome 2. Headset overview Thank you for using the BlueParrott B650-XT 2.1 BlueParrott B650-XT or S650-XT. We hope you will enjoy it! BlueParrott B650-XT/S650-XT features • Crystal-clear calls anywhere. Ultra-noise- NFC Zone cancelling mic removes 96% of background noise.* BlueParrott Button •...
2.2 BlueParrott S650-XT 2.3 Included accessories NFC Zone USB-C cable 3.5mm jack cable BlueParrott Button Voice commands (included with S650-XT) Mute microphone ANC/ HearThrough Power on/off (hold) Answer/end call Earcup release Reject call (hold) (one button on Microphone Car charger each side of the earcup) windscreens...
3.1 Switch from stereo to mono sound 3. How to wear Press both release buttons on the earcup and The headset can be worn with the microphone firmly pull the earcup down to remove it from on the left or right side. Adjust the headband the headset.
While charging, the LED indicator shows the 4. How to charge charging status. Red indicates the headset is charging. Blue indicates the headset is fully To charge the headset, connect the USB-C charged. charging cable to the headset’s charging port. It is recommended to charge the headset using the supplied charging cable.
5. How to connect 5.3 Pair using Bluetooth 1. Ensure the headset is powered off. 5.1 Power on 2. Press and hold the Multi-function button for approx. 6 seconds until you hear “Pair mode” Press and hold the Multi-function button for 1 and the LED flashes red and blue.
6. How to use 5.4 Pair using NFC 1. Ensure your headset is powered on and that NFC is enabled on your smartphone. 2. Place the NFC zone of your smartphone against the NFC zone of the headset until your smartphone confirms the connection. ANC/HearThrough BlueParrott Button button...
Page 9
While on a call, press and hold (2 sec) the Volume down button Skip track Press the Skip track to transfer to the call forward or back button. Transfer audio audio to your paired from headset to smartphone. Repeat to smartphone transfer the call audio back to your headset.
Page 10
6.2 The BlueParrott Button 6.3 Voice control By default, the BlueParrott Button mutes the The headset can be controlled by giving it voice microphone. However, the button can be commands, such as "Answer" to answer an configured for other functions, such as speed incoming call, or "Ignore"...
6.4 Active Noise Cancellation 6.5 HearThrough Active Noise Cancellation (ANC) counters HearThrough enables you to pay attention to noise by detecting and analyzing the pattern your surroundings and engage in conversation, of incoming sound and then generating an when not on a call, without needing to remove anti-noise signal to cancel it out.
6.6 Multiple call handling 6.7 Multipoint mode The headset can accept and handle multiple The headset can pair to 7 mobile devices and calls at the same time. connect to two at once (Multipoint mode). To connect to two mobile devices, use the Multiple call handling normal pairing process separately for each Press the Multi-function...
7. BlueParrott app 8. Support 8.1 FAQ View the FAQs at: BlueParrott app • BlueParrott.com/supportpages/BlueParrott- B650-XT • BlueParrott.com/supportpages/BlueParrott- Program your BlueParrott Button S650-XT anywhere, anytime. Push-to-talk to your contacts on 8.2 How to care for your headset Dial2Do’s MySay network. •...
Page 14
8.3 How to clean your headset 1. Apply normal dish soap and water to a cloth, making sure to wring out any excess liquid so the cloth is not dripping wet. Use soap and water only; do not use strong cleaning agents.
Need help?
Do you have a question about the BlueParrott B650-XT and is the answer not in the manual?
Questions and answers