Summary of Contents for ZKTeco FMB-05
- Page 1 Installation Guide FMB-05 Version: 1.0 Due to regular upgrades of systems and products, ZKTeco could not guarantee exact consistency between the actual product and the written information in this manual.
- Page 2 Dimensions Unit: mm Side 130.99 Bottom Mounting hole 20.5...
- Page 3 How to disassemble the base? Step 1: Take out the base from its carton. Step 2: Unscrew the four adjusting screws from the bottom of the base by your hand. Step 3: Remove the base plate from the bottom of the base. Mounting hole Fixing hole Base...
- Page 4 How to connect the mounting bracket with the base? Step 1: Take out the mounting bracket from its carton. Step 2: Unscrew the three mounting screws from the bottom of the mounting bracket by a screwdriver. Step 3: Fix the mounting bracket and the base with the screws which were unscrewed from the mounting bracket.
- Page 5 Step 4: Fix the base plate to the base with the adjusting screws. Base plate Adjusting screw...
- Page 6 How to connect the device with the mounting bracket? Step 1: Select the right mounting holes and x the back plate on the mounting bracket using the mounting screws. Step 2: Connect the cables to the device. Step 3: Attach the device to the back plate. Step 4: Fasten the device to the back plate with a security screw.
- Page 7 Step 5: After the installation is complete, connect the power cord and network cable to the device. Power supply unit DC 12V-3A...
- Page 8 Mounting Hole Description for Compatible Models Please choose di erent mounting holes for fastening the device according to the back plate of compatible models as shown below: SpeedFace-H5/H5L Elite Access FaceDepot 7B/7BL SpeedFace-V5L[TI] Proface X / X[P] / X[TD] / XE SpeedFace-V5L/V5 Mounting holes 4 &...
- Page 9 ZKTeco Industrial Park, No. 26, 188 Industrial Road, Tangxia Town, Dongguan, China. Phone : +86 769 - 82109991 : +86 755 - 89602394 www.zkteco.com Copyright © 2020 ZKTECO CO., LTD. All Rights Reserved.