It is a product developed and manufactured in the Czech Republic. All rights to this product are reserved by TESLA. The offer or the delivery of this product or the services associated with the product does not involve any transfer of the ownership rights.
The product also displays the current date and time. RaDEC can be placed anywhere in the room. It is recommended to place it as far away as possible from windows or devices that provide ventilation. The back of the indicator should remain unobstructed.
Page 4
Description of the indicated harmful variables for the human organism and their elimination in living spaces: The values are indicative only. Each individual reacts differently to different substances, and what may be harmless to one may cause trouble to another. If you are concerned about your health, we recommend that you discuss the issue with an expert.
Page 5
Above-limit values must be reduced immediately by ventilating and leaving the area at once. A malfunctioning heat source that exhibits imperfect combustion must be repaired immediately. Typical household levels should be in the range of 0–9 ppm. Higher values indicate an active source of CO at home. Carbon dioxide concentration CO2 –...
– The indicator is powered by the built-in battery – The display is off (reducing power consumption) – The display can be switched on for 90 sec by touching the top button (TESLA logo) with your finger – The built-in battery discharges gradually, minimum 7 days...
Page 8
Control: Home screen Fig. 1 – Home screen At the bottom of the display, there are symbols of all measured substances along with the real- time value and units. By pressing any of the symbols, the name of the substance and the measured value will appear in the main display field (radon measurement is selected in the picture).
Page 9
Charts The screen will show charts generated from the records of the substance that is selected for display in the main field on the home screen. To change the chart to another substance, you need to go back to the home screen using the back arrow in the upper field of the display. The chart display shows the value of the substance indicated in the upper field of the display.
Page 10
Configuration The top line is the same for all configuration screens. It contains a back arrow which, when pressed, switches to the home screen and simultaneously saves the set configuration values, and a line of 5 symbols which represent the individual configuration screens – "alarm limits", "time", "display", "sound" and "factory settings".
Page 11
5 % increments (the default value is around 70 %). You can also set display light time. Auto off – the display will only light up for 90 seconds after pressing the top button (TESLA logo) on the product.
Page 12
Audio and language configuration screen On this screen, you can press the respective button to select Audio alarm to On/Off. Only the acoustic alarm for CO cannot be switched off due to the high importance of this alarm. The sounds associated with pressing the display remain always active.
(located on the bottom side of the product behind the small hole. You will need a needle or other pointed/narrow object to press it). Declaration of conformity Declaration of conformity will be supplied by TESLA on request. To receive the declaration, please use the contact details at www.tesla.cz. 13/14...
Service With the exception of "Basic Maintenance", repair and service is only carried out by TESLA. TESLA Rubeška 215/1 190 00 Prague 9 - Vysočany, Czech Republic www.tesla.cz Warranty This product is supplied with a 24-month warranty starting from the date of purchase.
Need help?
Do you have a question about the RaDEC and is the answer not in the manual?
Questions and answers