Advertisement
General Installation Manual
•
Contact
your
SANYO
Representative for proper diode type,
if it is necessary to add or change
diodes due to system specifications.
MAINTENANCE
•
Some maintenance is recommended
to
maintain
optimal
performance of the solar modules.
•
If the module surface becomes dirty,
it may reduce output power.
•
It is recommended to clean the
surface of the module with water and
a soft cloth or sponge.
•
To remove persistent dirt, the module
can be washed with a micro-fiber
cloth and ethanol.
•
Alternatively, a mild detergent may be
used. Never use abrasive detergent,
strong alkaline detergent and strong
acid detergent to clean any part of the
module.
•
It is also recommended to inspect the
electrical and mechanical connections
annually.
•
If you need electrical or mechanical
inspection or maintenance,
recommended to have a licensed
authorized professional carry out the
inspection or maintenance to avoid
the hazards of electric shock or injury.
•
The return of any modules will not be
accepted by SANYO unless prior
written authorization has been given
by SANYO.
•
As part of our policy of continuous
improvement SANYO reserves the
right to change product specifications
at any time without prior notice.
For further information, please visit
www.sanyo-solar.eu
www.sanyo.com
or contact a SANYO
Authorized Representative.
© 2011 Sep. SANYO Electric Co., Ltd.
All Rights Reserved 9/6/2011
Authorized
output
it is
or
4
Advertisement
