After using the appliance, isolate the electric and water supply. Do not attempt to repair the appliance. Repairs made by unqualified persons may cause further damage. Repairs and servicing of this appliance must be carried out by DYNAMIC authorised personnel only. IMPORTANT CUSTOMER INFORMATION ...
NEVER use detergents or rinse additives not supplied by DYNAMIC in this machine. The use of chemicals supplied by others may cause damage to the machine and is in contravention the warranty terms and conditions.
INSTRUCTION MANUAL FOR DISHWASHERS USING THE MACHINE Key and symbols ON/OFF BUTTON 4 INFORMATION DISPLAY PROGRAMME SELECTION BUTTON 5 TIME BAR START BUTTON Switching the dishwasher on Turn on the main electrical switch and open the external water tap. Check that there is enough detergent and rinse ...
INSTRUCTION MANUAL FOR DISHWASHERS The cycle ends with two short beeps. The START key (3) of the selected programme returns to green and the display shows the message ‘END’. The time bar flashes. A few seconds after start-up, it is possible to start the wash cycle in advance by pressing the START key (3).
INSTRUCTION MANUAL FOR DISHWASHERS Turning the dishwasher off Press ON/OFF (1), on the DISPLAY (4) the central segments will light up, indicating that the machine is powered. Displaying information By holding the PROGRAMME SELECTION button (2) pressed for a few seconds you can display in ...
Level safety switch: Incorrect water level in the tank. Dirty filter: incorrect water level in tank due to dirty filter or overflow fitted incorrectly. IMPORTANT: in the event service is required, contact DYNAMIC Service with the error code if possible...
Page 8
To request detergents or rinse additive, contact us on 1300 000 323 or scan the QR code. DYNAMIC WASH - 10 LITRE PRODUCT CODE: DYNAMIC RINSE - 10 LITRE PRODUCT CODE:...
Need help?
Do you have a question about the DCU-40 and is the answer not in the manual?
Questions and answers