Coleman 2000002061 Quick Start Manual

Before you begin

Read all instructions before set up.
• Select a level site clear of rocks, branches, and other hard or
sharp objects, to install your shelter.
WARNING: Keep clear of overhead power lines.
• Do not set up your shelter under trees because of potential
lightning strikes or falling tree limbs in inclement weather.
• Secure with all stakes and guylines provided to prevent
property damage or personal injury.
• For best results in windy conditions, position narrow end of
shelter into the wind.
• Enlist the help of at least one other person to assist you when it
is time to assemble the shelter.

Pole Assembly

You will need to assemble and connect one pole
at a time to the hub.
1. Do not completely assemble poles.
a) Beginning at spring-clip end of pole,
assemble all but the last shock-corded
section. The pole and one section
should curve downward. (illus. 2)
b) Insert the spring-clip end into one of
the hub ports until it clicks into position.
(illus. 1), (illus. 2)
c) Repeat for each of the three remaining
poles. (illus. 2)
11' 9' INSTA-CLIP
X
(continued on other side)
TM SCREEN HOUSE
MODEL 2000002061

ASSEMBLY PARTS

Poles (4)
Part No. 5010000442
Hub
Frame Clips
Illus. 2
Screen House laid out in position
with partially assembled frame
locked into hub.
Hub (1)
Part No. 5010000441
Hub
Illus. 1
Poles inserted
into hub