Table of Contents
Advertisement
• After the ceramic panel cools, clean it with soft cloth dipped with little detergent
rather than water.
• It is recommended to use a high-power socket rather than a defective one. Do not
share a socket with high-power appliances such as air conditioners and electric stoves
to avoid over-current from causing fire.
• Never use this induction cooktop on a table or bottom plate made of iron or
stainless steel, as this may cause burning
of the unit.
• Because the bearing of the ceramic panel for the induction cooktop is limited, never
put too heavy objects on the ceramic panel, as this may cause damage to the plastic
lid and ceramic panel.
• In use, never leave it unattended for a long time. If leaving is necessary, make sure
that water inside the pot can prevent dry-burning due to excessively little water
from damage to the pot.
• Never use the induction cooktop in narrow space, and do not have foreign objects
to block the air entry and air vent, as this may affect radiation.
5
KNOW YOUR PRODUCT:
1) Air Vent
2) Glass Top
3) Cooking area
4) Control panel
5) 7 segment display
ATTENTION: Before use, please check for the plug and socket are in good condition.
Before positioning the pot, please clear off marks/dirt from pot surface & glass panel.
Put pot at the centre & never put empty pot on glass panel.
POWER & FUNCTION SELECTION:
• Plug in induction cooktop into power supply and switch on.
Short sound is heard & Mains voltage is displayed as eg U 230. This is standby mode.
• Press "ON/OFF" switch and unit will switch on to "MANUAL" mode by default.
Press "MENU" for desired cooking options. Once desired cooking function is selected unit
will start to operate on set cooking functions.
4
6
1
2
3
5
Advertisement
Table of Contents
