Gainsborough K214 Instructions For Use

Bronze Solar Light Up Bird Feeder
K214
v001: 09/08/21
Please read and retain these instructions for future reference
ASSEMBLY INSTRUCTIONS / INSTRUCTIONS FOR USE:
Unpack the components carefully. Please check all parts have been removed from the packaging.
Find an ideal Place for the Solar Light.
Place the solar light in an area where it will receive direct sunlight for at least 8 hours per day. The number of
hours the light will illuminate is directly proportional to the hours of sunlight it receives. If the light is placed
in a shaded area, it will not be able to fully charge and its illumination time will be limited. Do not place the
light near other outdoor lighting like porch or streetlights. These may fool the sensor and keep the light from
coming on, or cause it to turn off automatically.
•
Place your feeder in a quiet place where it can be seen and is easy to refit.
•
Place your feeder near trees or shrubs to have birds rest between meals.
•
Hang feeder at least 1m from windows to prevent birds from accidentally colliding into windows.
•
Outdoor use only.
ALWAYS POSITION IN DIRECT SUNLIGHT
Dimensions
(H) 21 x (W) 19 x (D) 19cm
Composition: Metal with powder coating
•
PEANUT BIRD FEEDER
•
DRAINAGE HOLES
•
SOLAR LIGHT
•
AMORPHOUS SILICON SOLAR PANEL – 1.2V AA
300MAH NI-MH
•
(OFFERS HIGHER EFFICIENCY, CAN STAND HIGHER
TEMPERATURES WITHOUT BEING AFFECTED AND
PREFORMS BETTER IN LOW LIGHT CONDITIONS)
•
WARM WHITE LED (not replaceable)
•
CHAIN IS 19 CM LONG
•
18 X 18 X 38 CM FULL DIMENSION
Requires: 1.2V AA 300 mAh NI-MH battery (included)