Advertisement
Instruction Manual
Bluetooth® Smart Sensor
Model: BT-02
General Description
The Bluetooth® Smart Sensor works with Embertec APS models that are Bluetooth ready.
Please visit embertec.com to identify the range of models that work with this sensor.
The Infrared Bluetooth® Smart Sensor activates the Power Saving sockets, monitors activity and is also
used to set the Active Powerdown®. It comes with a 9.8 ft/3 m cable, LED light and two button control.
It can also be controlled via your Android/iOS mobile device, by downloading and installing the
emberconnect™ app.
The Bluetooth® Smart Sensor receives signals from any of your remote controls and recognizes when
you are interacting with your Audio Visual (AV) components. The Bluetooth® Smart Sensor is also used
to set the time period for the Active Powerdown® feature. The default setting for Active Powerdown® is
60 minutes.
Once the associated Embertec APS unit has been installed, place the Bluetooth® Smart Sensor in a
convenient location that is in line of sight. Close to your television is the best position and within normal
operation of your existing remote control(s).
BT-02 Bluetooth Smart Sensor Instruction Manual
Advertisement
Table of Contents
Related Manuals for Embertec BT-02
Summary of Contents for Embertec BT-02
- Page 1 Active Powerdown® feature. The default setting for Active Powerdown® is 60 minutes. Once the associated Embertec APS unit has been installed, place the Bluetooth® Smart Sensor in a convenient location that is in line of sight. Close to your television is the best position and within normal operation of your existing remote control(s).
- Page 2 Switch the Power Saving sockets ON or OFF direct from your phone or tablet. See when your Embertec APS unit is about to switch off power to the Power Saving sockets. If it’s not convenient, you can delay the switch off with emberconnect™.
- Page 3 2. Ensure the Bluetooth® Smart Sensor is properly connected to the Embertec APS unit. 3. Plug in the Embertec APS unit and wait approximately 3 seconds for it to be ready. 4. Press and HOLD the MUSIC button on top of the sensor for 5 seconds. The LED on the front of the sensor will start flashing quickly for 1 minute.
- Page 4 This device is Bluetooth compatible. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Embertec® is under license. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
- Page 5 -1.04133dBi FCC ID 2AGKS-BT02SENSOR 20880-BT02SENSOR WARNING: Any changes or modifications not expressly approved by Embertec Pty Ltd could void the user’s authority to operate this equipment. Important Please retain your instruction book for future use. In the event that you need assistance, please contact us on 800.838.9659 or email us at customerservice@embertec.com.
Need help?
Do you have a question about the BT-02 and is the answer not in the manual?
Questions and answers