CAMPARK X30 Manual page 10

B. How to use memory card.
EN
1. The camera uses Micro SD card as storage, capacity up to
64GB supported, and to ensure normal function, please use
high speed memory card, Class 10 or above cards are
recommended.
2. Before using the camera please insert the memory card first,
and format the memory card in setting menu before using.
3. This camera does not support Hot swap,turn off the camera
before inserting or taking out the memory card.
4. Insert the memory card as indicated by the icon into the slot
until the card totally inside.To remove the memory card,
gently press the edge of the memory card until it pops out.
C. Power ON / OFF
1. Power on: Keep pressing the Power key for 3s till the screen is
on.
2. Power off: keep pressing the camera for 3s to power off
3. Auto power off: The camera will turn off after the camera is
idle for a certain time (Default time is 3mins)
4. Low power : When the camera is in low power, battery symbol
shows blank. Please charge the camera in time. Or The camera
will turn off automatically.
4