Summary of Contents for SawStop CTS-FS
- Page 1 Owner’s Manual Compact Table Saw - Folding Stand Model Number: CTS - FS Copyright SawStop, LLC All Rights Reserved. Published, October 2021 Updates of this manual may be available at www.SawStop.com...
- Page 2 • 4 lower legs • 8 carriage bolts Warning of general danger. • 8 lock nuts If missing any parts, contact SawStop (see pg. 4). Indicates additional information or tip. You will also need a 10 mm socket or end wrench. Safety Read and understand this owner’s manual and all safety warnings before using the stand.
- Page 3 The stand is fully opened when the center cross brackets (A) will not allow the stand to unfold any farther. Be aware of pinch hazards at the pivot points (B) of the assembly. 2. Open the clamps: pivot the front and rear clamps 90º counterclockwise. Compact Table Saw SawStop ®...
- Page 4 Parts 503.486.6923 parts@SawStop.com Sales 503.595.2665 sales@SawStop.com Our technical support team is standing by Monday-Friday, 7am-5pm Pacific Time. You can download this manual at: SawStop.com/CTSsupport SawStop, LLC 11555 SW Myslony Street, Tualatin, Oregon 97062 USA www.SawStop.com Compact Table Saw SawStop ®...
Need help?
Do you have a question about the CTS-FS and is the answer not in the manual?
Questions and answers