JDV ReelCaddy RC01S Instruction Manual

4. How to use the Included Brake Kit RCB1:
Brake Kit Includes:
(1) Brake
(1) Flat Plastic Spacer
BRAKE KNOB
RCBI
BRAKE
BRAKE
KIT
PISTON
ANY TYPE OF
CABLE REEL
FLAT PLASTIC SPACER
(COMES WITH REELCADDY)
Instructions on how to use Brake Kit RCB1:
A. The ReelCaddy Series comes standard with a "flat" plastic spacer.
Keep this flat spacer at the bottom of the spool rod.
B. Load cable reel onto ReelCaddy.
(Follow steps on page 3 for proper loading technique).
C. In upright position and with T-handle off, slide the Brake and plastic spacer
(RCB1 Brake Kit) over spool rod. The brake's piston needs to be facing
downward towards reel, and the spacer needs to sit in between the brake and
flange of cable reel. The RCB1 brake set is now positioned on top of the cable
reel flange.
D. Loosen the brake knob.Push brake against the plastic spacer, which is against
the cable reel, and apply pressure so that the brake's piston is
slightly depressed (applying friction toward the cable reel flange).
E. Tighten brake to spool rod by tightening both hex bolts. (Use 1/2" wrench)
F. Attach the T-handle and put the ReelCaddy in dispensing position.
G. Finger- tighten the "brake knob" to set friction against the cable reel.
The more you tighten the brake knob (clockwise), the more friction it provides
against the cable reel.
H. Now, you are ready to dispense the wire.
JDV Products, Inc.
22-01 Raphael Street, Fair Lawn, NJ 07410
Tel: 201-796-1720 Fax: 201-796-9399
www.reelcaddy.com
SPOOL ROD
HEX BOLTS
FLAT PLASTIC
SPACER
BRAKE
FLAT PLASTIC
SPACER
www.jdvproducts.com
Model #
RC01S
(Wire Not Included)
U1000 reusable cable
reel and RBC1 brake kit
sold separately.
JDV Products, Inc.
A-15929
Rev. 2
Model #
RC01L
(Wire Not Included)
www.reelcaddy.com
www.jdvproducts.com