Download Print this page

Care And Cleaning - Sunbeam MAESTRO KE6451 User Manual

Kettle quiet shield

Advertisement

The Maestro Kettle features the Sunbeam Quiet
Shield which is new and exclusive quiet boil
technology designed to make boiling water a
peaceful practice.
®
The Sunbeam Quiet Shield
is a stainless steel
disk attached to the kettle floor which acts as
a diffuser plate. It is perforated with a range of
holes which help disperse, and reduce the size
of, the water bubbles thus significantly
reducing the noise of the boiling process.
Maintaining the Quiet Boil Technology.
Mineral deposits in tap water solidify when
the water is heated; lime scale may be white,
coloured, even rusty-looking and is normally
visible but phosphate scale isn't generally
visible although may cause the water to
appear cloudy when heated.

Care and Cleaning

Always disconnect the kettle from the power
outlet before cleaning.
Never immerse the kettle switch area, cord or
power base in water, or allow moisture to
come into contact with these parts.
Descale Your Kettle Regularly.
Mineral deposits in tap water solidify when
the water is heated; lime scale may be white,
coloured, even rusty-looking and is normally
visible but phosphate scale isn't generally
visible although may cause the water to
appear cloudy when heated. This may cause
the interior of the water gauge to discolour,
cause overheating, trigger the boil-dry cut-out
mechanism or even reduce the kettle's life.
Even in soft water areas it is important to
descale your kettle regularly to help
maintains its lifecycle.
NOTE: Failure to descale products regularly can
be deemed as negligent handling and any
faults caused by mineral build up will not be
covered by the Sunbeam 12 Month Guarantee.
To remove this build-up, use Sunbeam Liquid
Descaler, a simple to use, non-toxic cleaner
available from electrical appliance specialists
and Sunbeam Appointed Service Agents.
4
Regular use of the kettle can lead to the
build-up of these minerals which reduces the
effectiveness of the Sunbeam Quiet Shield
as well as the performance of the kettle.
It is important to descale your kettle regularly
to maintain the
Quiet Shield
®
and to
prolong the life of
the kettle.
Sunbeam
recommend that the
kettle is descaled
every 4-6 weeks. Go
to page 6 for more
information on how
to descale your
Maestro Kettle.
Alternatively:
1. Fill the kettle with 1 cup of white vinegar
and the remainder with water and allow to
stand overnight. DO NOT BOIL.
2. Empty the solution from the kettle. Any
stains remaining inside the spout can be
removed by rubbing with a damp cloth. Fill
the kettle with clean water, bring to boil
and then discard the water. Repeat and the
kettle will then be ready to use.
To clean the stainless exterior
The stainless steel surface may be wiped over
with a damp cloth and polished with a soft
dry cloth.
CAUTION: Do not use chemicals, steelwool, or
abrasive cleaners to clean the outside of the
kettle, as these will scratch the stainless
steel surface.
To clean the mesh filter.
Press the button on the handle to open the
hinged lid. Grasp the top of the mesh filter
and pull upwards to remove. Wash in warm
soapy water and dry thoroughly before
replacing in the kettle.
®
Should you experience any
difficulties with your product
during the warranty period,
please contact our customer
service line for advice on 1300
881 861 in Australia, or 0800
786 232 in New Zealand.
Australia
www.sunbeam.com.au
1300 881 861
New Zealand
www.sunbeam.co.nz
0800 786 232
This product is covered by a 12 month
replacement or repair warranty, which is
in addition to your rights under the
Australian Consumer Law (if your product
was purchased in Australia) or New Zealand
Consumer Guarantees Act (if your product
was purchased in New Zealand).
Upon receipt of your claim, Crock-Pot will
-servicing or modification of the product
seek to resolve your difficulties or, if the
other than by Crock-Pot or an authorised
product is defective, advise you on how to
service centre;
obtain a replacement or refund.
-use of the product with other
accessories, attachments, product
To assist us in managing warranty claims, we
supplies, parts or devices that do not
recommend you register your product as soon
conform to Crock-Pot specifications; or
as practicable after purchase, on our
-exposure of the product to abnormally
Sunbeam website and uploading a copy of
corrosive conditions; or
your original receipt. View the Support
section of the Sunbeam website.
• extend beyond 3 months if the product is
In order to make a claim under our warranty,
used in commercial, industrial, educational or
you must have the original proof of purchase
rental applications.
documentation for the product and present it
when requested (if not already uploaded to
The benefits given to you by our warranty
our website).
are in addition to other rights and remedies
under law in relation to the product.
Should your product develop any defect
within 12 months of purchase because of
In Australia our goods come with guarantees
faulty materials or workmanship, we will
that cannot be excluded under the
replace or repair it, at our discretion, free of
Australian Consumer Law. You are entitled
charge. A product presented for repair may be
to a replacement or refund for a major
replaced by a refurbished product of the same
failure and for compensation for any other
type rather than being repaired. Refurbished
foreseeable loss or damage. You are also
parts may be used to repair the product.
entitled to have the goods repaired or
replaced if the goods fail to be of acceptable
Our replacement or repair warranty only
quality and the failure does not amount to a
applies where a defect arises as a result of
major failure.
faulty material or workmanship during the
warranty period. Your warranty does not
Our goods also come with guarantees that
cover misuse or negligent handling
cannot be excluded under the New Zealand
Consumer Guarantees Act.
(including damage caused by failing to use the
product in accordance with this instruction
If your warranty claim is not accepted, we
booklet), accidental damage, or normal wear
will inform you and if requested to do so by
and tear.
you, repair the product provided you pay
Your warranty does not:
the usual charges for such repair. You will
also be responsible for all freight and other
• cover freight or any other costs incurred in
costs.
making a claim, consumable items,
accessories that by their nature and limited
Should your product require repair or
lifespan require periodic renewal (such as
service after the warranty period, contact
filters and seals) or any consequential loss or
your nearest service centre. For a complete
damage; or
list of service centres, visit our website or
call our customer service line for advice on
• cover damage caused by:
1300 881 861 in Australia, or 0800 786 232
-power surges, power dips, voltage supply
in New Zealand.
problems, or use of the product on
incorrect voltage;
5

Advertisement

loading