Pool Maintenance - FitMax THE IPOOL Instruction Manual

THE IPOOL INSTRUCTION MANUAL
Please carefully read this instruction manual
before installing and using the iPool

Pool Maintenance

What Chemicals Will I Need For My iPool?
Answer:
You should monitor pool pH weekly using testing strips you can purchase online or at a local pool
supply store. Because of regional differences, You can best determine the ideal pH range for your
pool water by consulting your local pool supply store, but it generally falls within a pH of 7.0 to 7.6.
To maintain ideal pH balance, you need to purchase both a pH increaser (alkaline) and a pH reducer
(acid) online, or from your local supply store.
A small amount of chlorine is also needed, unless you are using a salt water system. Generally
speaking, due of the small size of the iPool, it will often be only a few ounces, in either tablet or
powdered form. To determine the proper portions to use, consult the chemical manufacturer's
recommendations, or check with your local pool supply store.
Finally, use of a few drops of a pool clarifier each week is recommended. These can be purchased
online, or at your local pool supply store, and will assist in keeping your iPool clean by clumping
smaller particles together so they can be more easily caught by the filter cartridge.
How Long Should I Run The Filter Pump?
Answer:
Run the filter pump for two to four hours per day to keep the water well-oxygenated, and prevent
algae from growing in your iPool. Ensure that the filter cartridge is clean, and change it once a month.
You can use a timer with the filter pump to control how long it runs. In general, don't swim in your
iPool while the filter pump is running.
For more information please visit:
http://fitmaxipool.com/frequently-asked-questions/
Our installation video can be found at:
http://fitmaxipool.com/instructions/
3