Table of Contents
Advertisement
Quick Links
CONTENTS
WE'RE THINKING OF YOU
Thank you for purchasing an Electrolux appliance. You've chosen a product that brings with it decades of professional
experience and innovation.
Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that
you'll get great results every time.
Welcome to Electrolux.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.electrolux.com/support
Register your product for better service:
www.registerelectrolux.com
Buy Accessories, Consumables and Original spare parts for your appliance:
www.electrolux.com/shop
CUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the following data available: Model, PNC, Serial
Number.
The information can be found on the rating plate.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
Advertisement
Table of Contents
Related Manuals for Electrolux EW6F528S
Summary of Contents for Electrolux EW6F528S
-
Page 1: Table Of Contents
17. QUICK GUIDE WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time. -
Page 2: Safety Information
SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety •... -
Page 3: Safety Instructions
• The appliance must be connected to the water mains using the new supplied hose sets, or other new hose sets supplied by the Authorised Service Centre. • Old hose sets must not be reused. • If the mains power supply cable is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons to avoid an electrical hazard. -
Page 4: Product Description
• Do not wash fabrics which are heavily soiled with oil, displays, pressure switches, thermostats and sensors, grease or other greasy substances. It can damage rubber software and firmware, including installed software, door, parts of the washing machine. Prewash such fabrics by door hinge and its seals, other seals, door locking hand before loading them into the washing machine. -
Page 5: Technical Data
4. TECHNICAL DATA Dimension Width/ Height/ Depth/Total depth 59.6 cm /84.7 cm /57.6 cm Electrical connection Voltage 230 V Overall power 2200 W Fuse 10 A Frequency 50 Hz Level of protection against ingress of solid particles and moisture ensured by IPX4 the protective cover, except where the low voltage equipment has no protection against moisture... - Page 6 Water drainage The drain hose should stay at a height of no less than 60 cm and not more than 100 cm. You can extend the drain hose to maximum 400 cm. Contact the service centre for the other drain hose and the extension.
-
Page 7: Accessories
5.3 Electrical connection Connect the mains plug to the mains socket only at the end of the installation. Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply. Necessary data are available in the chapter „Technical data“. -
Page 8: Control Panel
6.3 Pedestal with the drawer authorised dealer Only appropriate accessories approved by ELECTROLUX ensure the safety standards of the appliance. If unapproved parts are used, any claims will be invalidated. 7. CONTROL PANEL 7.1 Special features Your new washing machine meets all modern requirements for an effective treatment of laundry with low water, energy and detergent consumption and will care for fabrics. -
Page 9: Dial And Buttons
7.3 Display 8.5 Prewash With this option you can add a prewash phase to a washing programme. The relevant indicator illuminates. • Use this option to add a pre-wash phase at 30 °C before the washing phase. This option is recommended for heavily soiled laundry, especially if containing sand, dust, mud and other solid particles. -
Page 10: Programmes
8.8 On/Off 8.7 Temp Press this button for a few seconds to activate or deactivate When you select a washing programme, the appliance the appliance. automatically proposes a default temperature. Two different tunes sound while switching the appliance on Touch this button repeatedly until the desired temperature or off. - Page 11 Programme Reference Maximum Programme description Default spin speed Load (Type of load and soil level) temperature Spin speed Temperature range [rpm ] range Outdoor 1200 rpm 2 kg4) 30 °C (1200 -400) 1 kg5) Do not use fabric softener and make sure that there is no 40 °C –...
-
Page 12: Settings
Programme Prewash Delay Time Save Spin Start ■ ■ ■ ■ Wool ■ ■ ■ ■ ■ ■ Sport ■ ■ ■ ■ ■ Outdoor ■ ■ ■ ■ ■ ■ Denim 1) Select the spinning speed. Please ensure that it corresponds to the items washed. For spin cycle one can use only draining function. -
Page 13: Before First Use
10.3 Permanent Extra Rinse 12.3 Filling the detergent and With this option you can permanently have an extra rinse when you set a new programme. additives • To activate/deactivate this option , hold down the Prewash button until relevant indicator comes on/goes off. - Page 14 12.7 Starting a programme with the delay start 1. Touch the Delay Start button until the display shows the desired delay time. The related indicator comes on 2. Touch the Start/Pause button . The appliance door locks and starts the countdown of the delay start. The display shows the indicator .
- Page 15 The washing programme continues. 12.12 End of the programme When the programme has finished, the appliance stops automatically. The acoustic signals operate (if they are To start the programme again make sure that the active). programme dial is correctly positioned on the interrupted The display shows programme and the indicator of the Start/Pause button The indicator of the Start/Pause button...
-
Page 16: Hints And Tips
Turn the programme dial to set a new cycle. If the dial is rotated to the "Reset” position , the 13.3 Detergents and other treatments appliance automatically turns off in 30 seconds. Correctly chosen detergent and amount of it would help to achieve good washing results and prevent pollution of If you set a programme or an option that ends with environment:... -
Page 17: Care And Cleaning
To find out the water hardness in your area, contact your local water authority. CAUTION! Use the correct quantity of water softener. Follow the Do not clean the metal surfaces with chlorine-based instructions that you find on the packaging of the product. detergent. - Page 18 For a thorough clean: • Remove all laundry from the drum. • Run a Cotton programme with the highest temperature. Add a small quantity of powder detergent into the empty drum, in order to rinse out any left residues. 14.8 Cleaning the detergent dispenser To prevent possible deposits of dried detergent or clotted fabric softener and/or formation of mould in the detergent dispenser drawer, once in a while carry out the following...
- Page 19 Proceed as follows to clean the pump: WARNING! Make sure that the impeller of the pump can rotate. If it does not rotate, contact the Authorised Service Centre. Make sure also that you tighten the filter correctly to prevent leakages.
- Page 20 14.10 Cleaning the inlet hose and the valve filter 14.11 Emergency drain If the appliance cannot drain the water, carry out the same procedure, described in 'Cleaning the drain pump' paragraph. If necessary, clean the pump. 14.12 Frost precautions If the appliance is installed in an area where the temperature can reach values around 0°...
-
Page 21: Troubleshooting
15. TROUBLESHOOTING WARNING! Refer to Safety chapters. 15.1 Error codes and possible problems The appliance does not start or it stops during operation. First try to find a solution to the problem (refer to the table). If the problem persists, contact the Authorised Service Centre. WARNING! Deactivate the appliance before carrying out any check. -
Page 22: Consumption Values
Problem Possible solution • Adjust manually the items in the tub and start the spin phase again. This problem may be caused by balance problems. There is water on the floor. • Make sure that the couplings of the water hoses are tight and there is not water leakages. - Page 23 16.2 Legend Amount of laundry h:mm Programme duration. Energy consumption °C Washing temperature. Liters Water consumption. Rotation speed. Residual moisture content at the end of spinning cycle. The higher the spinning speed, the more noise and the less residual moisture content there is. Values and programme duration could vary depending on the conditions (e.g.
-
Page 24: Quick Guide
16.5 Regular programmes These are only approximate values. Programme Liters h:mm °C rpm1) Cotton2) 2,60 3:25 1200 90°C Cotton 1,70 3:00 1200 60°C Cotton 20°3) 0,48 3:00 1200 20°C Synthetics 0,68 2:00 1200 40°C Delicate4) 0,26 1:00 1200 30°C Wool 0,24 1;05 1200... - Page 25 17.3 Programmes Programmes Load Product description Eco 40-60 White cotton and coloured cotton. 8 kg Regularly, heavily or lightly soiled items. Cotton 8 kg White cotton and coloured cotton. Synthetics 3 kg Synthetic items or mixed fabric items. Delicate 3 kg Delicate fabrics such as acrylics, viscose, polyester items.