Related Manuals for Meyer Diamond Edge 41770
Summary of Contents for Meyer Diamond Edge 41770
- Page 1 Form No. 1-1242 April 2022 Assembly Instructions Central Hydraulics Includes: 41770 18513 Euclid Ave. • Cleveland, Ohio 44112-1084 © 2022 Printed in the U.S.A. www.meyerproducts.com Phone 216-486-1313...
-
Page 2: Table Of Contents
NOTICE: Meyer Products LLC reserves thje right, under its continuing product imporvement program, to change construction, design, details, specifications, and prices without notice or without incurring any obligation. Meyer Products LLC assumes no responsibility for installations not made in accordance with these instructions. -
Page 3: Black Iron Parts Lists
Black Iron Parts List... - Page 4 Black Iron Parts List Item Part Description Item Part Description 41720 Pkg: DE SOS E73 7.5-9.0 41292X • Accessory Box 05818 Lift Ram 1.75 x 8” 07178 •• Trip Spring 05887 •• Ram (1-1/2” x 10”) 23067 •• Nite Saber LED Kit 11859 •...
-
Page 5: Moldboard Parts List
Moldboard Parts List Part No. Part No. Part No. Part No. Item Description 7’ 6” 8’ 8’ 6” 9’ 84350 84351 84352 84353 Moldboard Assembly 84360 84361 84362 84363 • Moldboard Weld 84127 84128 84129 84130 • Cutting Edge 08223 08223 08223 08223... -
Page 6: Plow Assembly & Adjustments
Note: All electrical connections should have both ends coated with a dielec- Level 3 = Rows 3 and 5 tric grease (Meyer Part # 15632) prior to final installation. This will ensure a good connection and help in preventing corrosion. - Page 7 Plow Assembly & Adjustments Trip Spring Adjustment Trip Spring Adjustment Lift Chains Lift Chains Attach Eye Bolts to Moldboard and Trip Springs to Pivot Bar, making certain Attach the Lift Chain to the Lift Arm through the two hooks on the lift locknuts are positioned as shown below.
-
Page 8: Mounting Plow
Mounting Plow NOTE: NOTE: Pictures may vary based on model A. Pull vehicle into plow E. E. Remove crankstand assembly and push plow from a-frame. assembly forward an inch or two. B. B. Twist handles on both sides to engage spring loaded pins. -
Page 9: Dismounting Plow
Dismounting Plow A. Push lift arm down until there is slack in the chain. E. E. While slightly pushing the lift frame towards vehicle pull handles on either side to disengage pins then twist until the leg locks the pin in the open position. B. -
Page 10: Pre-Delivery Inspection
PRE-DELIVERY INSPECTION Vehicle Make: Vehicle Model: Vehicle Year: Vehicle VIN#: Vehicle FGAWR: Installing Company: Hydraulic Serial Number: Moldboard Serial Number: All bolts torqued to specification Plow Operation Up Clevis height Suspension interference Plow Operation Left Clevis height in inches Plow Operation Right Trip springs adjusted Plow Operation Down Lift Chain Adjusted...
Need help?
Do you have a question about the Diamond Edge 41770 and is the answer not in the manual?
Questions and answers