SHARX SECURITY HTNR16560 Quick Start Card

HTNR16560
16 Camera Network Video Recorder
HD TV or
Using the NVR with Sharx HTNC PoE cameras: Just plug a network cable from the Sharx HTNC camera into an
available port in the back of the NVR. No need to set IP addresses. The NVR provides power to the camera and
displays live video on a full HD monitor or TV attached to the NVR. Recording is started automatically as well.
Note1: HTNC45xx series with 5 MP resolution are supported in the rst 4 ports. Other ports support up to 3 MP.
Note2: HTNC4410M, HTNC4430XIR need special power supplies connected between the NVR and camera.
Using the NVR with other cameras: Samsung and many other new ONVIF S compatible cameras with 3 video
streams and a default username admin and password admin can plug right in. Some models including older
Sharx SCNC series need to be set up as RTSP compatible cameras instead of ONVIF. Contact us for setup help.
See the back side of this card or scan QR code for more details, and please contact us if you have any questions.
www.SharxSecurity.com customerservice@sharxsecurity.com
HD monitor
PC or Mac with software
iPhone, iPad, Android with app
NVR
Welcome!

Default IP: 192.168.0.8

Username: admin
Password: admin

User Guide:

www.sharxsecurity.com/pdf/htnr16560.pdf
To reset everything to factory defaults: use menu on
attached TV or monitor, or use SmartManager software
®