Nacon ASYMMETRIC User Manual page 4

EN /
I
To charge your controller, plug the USB-A connector of the charging cable to
one of the free ports of your PlayStation
connector to your controller.
controller is OFF. When the controller is ON, the LED is White, with a breathing
- Battery type: Lithium-Polymer
- Battery capacity: 1200mAh
- Playing time: up to 7 hours
- Charging time: up to 6 hours
Note: when you are using the wireless controller, you can check the battery capacity status by holding the
battery indicator button (16) for more than 1 second.
The LED bar (10) on the front of the wireless controller will light up in one of
the following colours when the Battery Indicator Button (16) is held for more
than 1 second:
- GREEN: battery level between 75% and 100%
- YELLOW: battery level between 50% and 75%
- ORANGE: battery level between 25% and 50%
- RED: battery level between 10% and 25%
-
press the 'PS' button.
To preserve battery integrity, we recommend that you always re-charge when
I
To synchronise your wireless controller with the USB receiver,
follow these steps:
- Ensure that your controller is OFF.
- Press and hold the "SYNC" button of your USB Bluetooth
- Press and hold the PS and SHARE buttons on your wireless controller until
Once the synchronisation is done the LEDs on the USB Bluetooth
battery level at less than 10%
4 console and plug the micro USB
®
receiver until the
®
receiver
®