Learning Function - Evervue Aqua Manual

Aqua Remote Control Manual

Learning Function

This function can work for TV / SAT/ DVD/ HOM devices.
1 Use TV as example, press and hold the device
Then press and hold [VO+] key about 5
2
seconds, until LED light will be lit. Release
prepared for its learning functions.
Point the original remote control to your Aqua
3
remote. The distance should be within
1-2"/ 2-5 cm.
Press the function key of the original remote
4
control and the LED light of this remote will
any key of remote to save the code. The LED
continue learning other function keys.
5 After learning all the keys, please press [TV] key
(If set up to another other device, please press
other device key) then press [VOL-] key, the
LED light should turn OFF. The learning will be
saved.
*NOTICE: During the whole set up process, if no key is pressed in 25 seconds,
the learning state will be exited without saving.
www.evervue.com
7