Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Rayming Manuals
  4. Industrial Equipment
  5. RMLASER
  6. Manual

Rayming RMLASER Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
会Thank you very much for purchasing Rayming laser machine.
会Please read this User of manual carefully before start using, and
sure to be familiar with operating of the machine. It
master the technology to make your laser
longer and steadily.
为Please shut off the power supply immediately and refer to this manual
if any exceptional case happens.
yourself, please contact us or local agent by email or phone.
为You can login in our
information
immediately, so you can get new
from us or
local
为Please
remember the "Equipments
order
to
guarantee people and machine
1.Factory holds the
2.Factory only
bears law obligation of the product itself, and don
the other loss of the customer which is caused by the broken-down
machine.
website
at any place and get the contact
agent at any time.
'
s safe.
Statement
right of changing products without advance notice.
machine
working much
'
If you can
t solve the
information or help
maintenance
and safe notice气in
make
is better to
problem
'
t bear

Advertisement

loading
Need help?

Need help?

Do you have a question about the RMLASER and is the answer not in the manual?

Questions and answers

Summary of Contents for Rayming RMLASER

  • Page 1 会Thank you very much for purchasing Rayming laser machine. 会Please read this User of manual carefully before start using, and make sure to be familiar with operating of the machine. It is better to master the technology to make your laser...
  • Page 2 lPreoaratory work and Calibration laser before your laser start work Any wrong�ration can cause serious damage to your machine or reauire more corrective work. 1. Introduction 1.1 Safety introduction: the laser machine described here is a Class IV laser device and is dangerous. The laser will instantly ignite clothing, wood, paper, plastics, and many...
  • Page 3 other ise work with lasers or other high voltage devices of any kind 飞λr 乡 Do So At Your Own Risk. 1.2 Fittings prepared One large water bucket that has a capacity of about 25kgs purity water, using for cooling laser tube. Or use one chiller which we recommend.
  • Page 4 2) Exhaust-fans, air-exhaust pipe, and track exhaust were used to blow away the exhaust gas efficiently to avoid smoke on the lens and cooling machining surface, the down exhaust-fan has the additional sorption function. The exhausting system made出c machine operation fast and efficiently.
  • Page 5 *. Artwork and gift fields: engraving on bamboo, wooden book, redwood, double-colored plate, box-shaped artwork, chessboard, etc. Industrial art decoration and advertising industry: Engraving on /cutting all kinds of nonmetal materials ( density board bamboo and wood articles, 乡 double-colored board/ color board, cloth, Acrylic, leather, glass, malachite, organic glass I plexglass, crystal, marble and so on).
  • Page 7 队 川 ， �， ...- ...、低 ．幡M f. .. 寸...
  • Page 9 Machine work time Laser time work time 4. Installation Installation of the main machine...
  • Page 10 4.1.1 Working environment Note Only qualified or trained person is authorized to install and repair the equipment! 1) Machine must be put in the dry environment. It will cause abnormal when operation if wet which include short circuit of component, part of high-woltage discharge abnormally etc.

  • Page 11: Installation

    REMOVE 3PCS THE CABLE TIES FROM X Y AXIS BEL check if there is any damage when transported Attention: if you find 1y damage on the machine while installation process, 细 please inform our company or authorized agency. 4 .1 . 3 Location of the machine The machine should be put near the windows Fix wheels of the machme four...
  • Page 12 Connect the water outlet of the chiller with the water inlet of the machine, and the water inlet of it with the water outlet of the machine. Do not miss the signal wire connect. (If water pump, you need a signal wire too,...
  • Page 13 4 .1 . 7 Installation of the laser tube Take off the screw from the two mounts which are used for fitting the laser tube. Put the laser tube on two bases. Attention: distinguish Light outlet and water inlet & outlet. Plug in water inlet and outlet.
  • Page 14 ’ Press 'test button, the laser light turn on. It is show your machine in right preparatory work. In especially right cooling circulation. It is important. Attention: Make sure the cooling water cycle running well before the machine start to work, or it will damage the laser tube. 4.4 Regulation of the optical path 4 .4 .1 The structure chart of optical path XtY1...
  • Page 15 6. Object being processed 7. Working platform Laser optical path is laser guide system. The complete system is made up of laser tube, three reflecting mirror队 one focusing lens and related adjusting devices. These are the main parts of the machine. Optical/light path has close relationship with the engraving and cutting...
  • Page 16 Then tum to ray path X. Move the laser head to the left of crossbeam. ” Press "test button to make a dot Then move it to the right to make another dot. Using adjusting screw of the second reflecting lens (3) To make these two dots totally matched together.
  • Page 18 司j the ray path is a usted well, the light of the laser head should be in the center of each corner.
  • Page 19 4.4.5 Adjustment of the focus lens 「一 ／－－－－－ － 卢 －－ 铲 、， 三三三写 卡 、 Focal length: 63.5 lMM to the surface of object 土 1. Focusing lens cap 2. Focusing lens ( convex side down ) 3. Air-in nozzle 4.
  • Page 20 The shape Request： The speed of light passes through the center of the lens vertically Do a dot on the test surface, the smallest point is the position of the focus (attention:The laser intensity should not be too high) 的 。...
  • Page 21 laser machme...
  • Page 22 4.4.6 Adjustment of the third reflecting lens...
  • Page 23 Make s c that whether the acryl is vertical through the spot testing ,if not, 旺 adjust the third screw upper. Attention: make sure the cooling water cycle running well before the machine start to work, or it will damage the laser tube. 5.
  • Page 24 厅事呢军军暴 www.rmlaser.com ． ③ :Reset the whole system; ． :Set relative origin; ． :Let the Laser to splash; ． ’ :To track by the current file s frame; ． :The management of the memory and U disc files;...
  • Page 25 ． 回 :Set the speed of the cur ent running layer, or set the 『 direction keys' move speed; ． 因 :Set the max laser powe of the current running layer, or set 『 ＇’ the power of “Laser Key; ．...

  • Page 26: The Main Interface

    。 Introduction t the Main Interface The main interface When the system is powered on, the sc「een will show as below: Coordinate Graph layer Running arameters progress bar Figure 8.2-1 • ’ G raph Display Area: To display the whole file s track, and display the running t ack.

  • Page 27: Max/Min Power Keys

    Speed key ” Push the Speed key when the screen is on the main interface, it will show as below: “ ，JJ a」 ． ． Modified press Enter Figure 8.2-2 Push the “X＋／－“Keys to move the cursor in the numeral a ea, and push the “Y＋／－”keys to change the 「...
  • Page 28 30.0 MinPow e 止 30.0 MinPow er 2: Press Z几J move item 岛1odified press Enter Figure 8.2-4 ” When “Z/U key is pushed, the green block can move up and down to denote the changing item, then “Y＋／－”keys and “X＋／－”keys can be used to change the value. Set the layer parameters “...
  • Page 29 User ca push 门 ” ” the parameter if needed.“OK to validate the change, and “Esc to invalidate the change. Z/U Key The Z/U key can be pressed when the system is idle or the work is finished. On pressing this key, it will show some ent ies in the following inte face:...
  • Page 30 - 30 -...
  • Page 31 6. Safety consideration and maintenance 6.1 Safety consideration 1) It is forbidden to start the machine without earthing. The earthing wire of laser power must be connected with the earth. It can not be connected on facilities such as doors, windows, water pipes and so on. The wire should be pulled to the outdoor ground.
  • Page 32 and lens. It is forbidden to put any flammable and explosive articles closed to the equipment so as to avoid fire. 8) Any irrelevant total reflection or diffuse reflection objects can not placed in the equipment to prevent the laser from reflecting on human body or flammable articles directly.
  • Page 33 Re gulation care fully. Otherwise the manufacture r will not take re sponsibility for any troubles of the machine or physical i可uries. 6.2 Maintenance 6.2.1 Cooling water ne e ds about 25 kilograms of cooling wate r, the te mpe rature of the wate r is no higher than 3 5℃.
  • Page 34 Draw out the laser tub e form the end of the tub e （出c faraway of the reflecting lens I) carefully and then put in on the safe place. Attention : The useless laser tube is fragile and need dealing carefully;...
  • Page 35 the laser head and the inner parts to make sure its neatness. 4) Install the focus lens. Attention: The flat surface of the focus should face up 6.2.4 Cleanness of the reflecting lens Wet the lens tissue with alcohol to wipe it directly. Attention: You should wipe the reflecting lens entoectad deasil circuit by circuit.
  • Page 36 switch power. If there is dewdrop, user should shut off power supply, then make it dry with hairdryer. 司j If the light route shifts when engraving it should be a usted as soon as possible. 乡 When eliminating troubles, 220V power supply should be shut at first.
  • Page 37 alcohol and Aether is 1 : 1) Usually they should be cleaned once a week. 5, Should open the fan when working, avoid polluting the lens and focus lens. ’ 6, Should let out the laser tube s water in winter, avoiding crack of tube for cold weather.
  • Page 38 part of water and add cold water ) . ’ 3, Special needs, when adjusting the lighting, pls don t make it exceed 20MA prevent fast aging of laser tube. 4, Must clean the water case, water pump and rubber pipe eve町three days.
  • Page 39 Introduction of main vulnerable parts 1. Laser tube This machine uses home -made se ale d off type carbon dioxide laser tube . Air volume in pipe is fixe d, whose service life is about 1 OOOh. Its service can be roughly divided into four phases (average 8 hours every day): Phase one: excellent phase, when laser tube is in steady...
  • Page 40 (2) La ser current ca n't be too much and must be lower tha n 20mA. In a ddition, light intensity should be a djusted to be sma ll a s far a s possible under the condition of satisfyi engraving depth and speed.
  • Page 41 Question Reason Solut10n Laser power is bad change laser power Machine ’ doesn t produce Laser power data wire is bad change laser power data wire laser There is no TTL signal output in control Check control signal 古1e laser tube is aging change laser tube The focus lens is dirty...
  • Page 42 Trouble reasons: there is external interference. If earthing isn't firm， 出c static electricity of computer is too intense, or computer has trouble by itself, USB cable trouble; engraving path has faults. Please redesign or contact with our technology department. 4. The depth of engraving on any material is too shallow. Trouble reasons: light way deviates (details are offered in Chapter Three Paragraph...