Rivers Edge Treestands RE658 Operator's Manual

Jumbo jack 1-man ladder stand

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

WE ARE HUNTERS

PRODUCT MEETS

INDUSTRY STANDARDS

RECOGNIZED BY

PARTICIPATING MEMBER

Get parts online at

www.HuntRiversEdge.com

Operator's Manual

JUMBO JACK

1-MAN

Ladder Stand

MODEL RE658

Maximum Height

17' 1" to shooting rail

Maximum Field Rating

300 lbs

Tree Diameter Range

12" to 20"

Wear Your

Harness!

C/N: 35943, 41454

REV3: 01/31/2022

P/N: 35939

Table of Contents

Need help?

Do you have a question about the RE658 and is the answer not in the manual?

Questions and answers

Summary of Contents for Rivers Edge Treestands RE658

Page 1 Operator's Manual JUMBO JACK WE ARE HUNTERS 1-MAN Ladder Stand MODEL RE658 Maximum Height 17’ 1” to shooting rail Maximum Field Rating 300 lbs Tree Diameter Range 12” to 20” Wear Your Harness! PRODUCT MEETS INDUSTRY STANDARDS RECOGNIZED BY Get parts online at P/N: 35939 ©...
Page 2: Table Of Contents
Operator's Manual JUMBO JACK 1-MAN Ladder Stand INTRODUCTION Rivers Edge® Treestands are engineered with you the hunter in mind. We appreciate your purchase of one of our world class treestands. Follow these few simple instructions and your stand will provide you many years of trouble-free pleasure. Instructions should be kept in a safe place and reviewed at least annually.
Page 3: Warnings
Operator's Manual JUMBO JACK 1-MAN Ladder Stand READ AND UNDERSTAND THE FOLLOWING WARNINGS BEFORE ASSEMBLY STOP MODEL RE658 WARNING MAXIMUM USE HEIGHT - 17’1” TO SHOOTING RAIL Never jump or bounce on a treestand to seat it to the tree.
Page 4: Inspection And Maintenance
Operator's Manual JUMBO JACK 1-MAN Ladder Stand WARNING INSPECTION AND MAINTENANCE Always lean forward as you climb and attach your harness to the tree before securing the platform to the tree and BEFORE EACH USE PERFORM THE FOLLOWING: stepping onto the platform. •...
Page 5: Hardware Identification Chart
Operator's Manual JUMBO JACK 1-MAN Ladder Stand TOOLS REQUIRED 7/16” WRENCHES 4MM ALLEN # 27477 WRENCH (INCLUDED) HARDWARE LIST Item Part No. Image Description #19847 LOCKPIN BOLT # 48240B 1/4 X 1-1/2 IN BOLT # 48271B 1/4 X 2-1/4 IN BOLT # 67540B 1/4 X 2-3/4 IN...
Page 6 Operator's Manual JUMBO JACK 1-MAN Ladder Stand HARDWARE LIST (CONTINUED) Item Part No. Image Description # 48752B NUT 1/4 IN BOLT # 26813 M6 X 20 MM BOLT # 29727 M6 X 60 MM BOLT # 26959 M6 X 70 MM WASHER YELLOW #23572 PLASTIC 2 MM...
Page 7 Operator's Manual JUMBO JACK 1-MAN Ladder Stand HARDWARE LIST (CONTINUED) Item Part No. Image Description KNOB 28839 M6 X 29MM SQ PLUG END #29712 22 MM Check for parts online at www.HuntRiversEdge.com or call 800-345-6007...
Page 8: Assembly Instructions
Operator's Manual JUMBO JACK 1-MAN Ladder Stand ASSEMBLY INSTRUCTIONS IMPORTANT ASSEMBLY TIP: All assembly must be done in this order at ground Do not tighten any nut and bolt combinations completely level before uprighting. until all parts are assembled together! Finger tighten plus one turn of a wrench only! This will temporarily hold the Do not remove labels/warnings from product, they are lock- nut on the bolt while helping alignment of all parts!
Page 9 Operator's Manual JUMBO JACK 1-MAN Ladder Stand Assemble the platform by attaching the platform supports (23) to the bottom of the front and rear platform sections (12 and 13) using four 1/4-20 x 2-1/4 IN bolts (26) and nuts (30). Attach the rear platform (13) to the left and right seat supports (18 and 19) using two 1/4-20 x 2-1/4 IN bolts (26) and nuts (30).
Page 10 Operator's Manual JUMBO JACK 1-MAN Ladder Stand Thread the M6 x 70 MM bolt (33) all the way into the seat tensioner (6). To assemble the seat (16), slide the seat tensioner (6) through the right seat tube and into the left seat tube so that the head of the M6 x 70mm bolt (33) bottoms out on the inside of the capped seat tube.
Page 11 Operator's Manual JUMBO JACK 1-MAN Ladder Stand Assemble the shooting rail (3 and 20) by inserting the two shooting rail parts (3) into the shooting rail part (20). Align the holes and secure together using two 1/4-20 x 1-1/2 IN bolts (25) and nuts (30).
Page 12 Operator's Manual JUMBO JACK 1-MAN Ladder Stand Insert the top ladder section (21) into the pockets on the flared platform rails (10) and secure using two 1/4-20 x 1-1/2 IN bolts (25) and nuts (30). Attach the bent end of the platform braces (11) to the rear platform (13) using two 1/4-20 x 2-3/4 IN bolts (27) and nuts (30).
Page 13 Operator's Manual JUMBO JACK 1-MAN Ladder Stand 11. Attach the stabilizer bar extension (1) to the bracket on the middle ladder section (7) using a lockpin (24). Slide the stabilizer bar (2) into the extension (1) and secure using a lockpin (24). Make sure lockpin passes through support tube and stabilizer bar at appropriate hole to achieve desired distance from tree.
Page 14: Warnings
Operator's Manual JUMBO JACK 1-MAN Ladder Stand READ AND UNDERSTAND THE FOLLOWING WARNINGS BEFORE SETUP AND USE STOP WARNING WARNING Double check assembly steps to be certain you have Always maintain three (3) points of contact when correctly assembled this product. climbing a ladder treestand.
Page 15: Setup And Use Instructions
Operator's Manual JUMBO JACK 1-MAN Ladder Stand SET UP AND USE INSTRUCTIONS FIGURE 13 WARNING Never use a treestand on a dead, leaning, diseased or loose barked tree, or a utility pole. Always avoid electrical power lines. Bring ratchet strap(s) up with you in a pocket - Do Not carry in your hands! During installation and removal of ladder treestands, you must always and properly use the included Full Body...
Page 16 Operator's Manual JUMBO JACK 1-MAN Ladder Stand 5. a. Loop the D-loop end of the two 16' criss cross straps (45) FIGURE 17A FIGURE 17B through the loop end to form a cinch knot around the ladder rail tube. Secure beneath a step rung, at the stabilizer bar height location.
Page 17: Finished Ladder
Operator's Manual JUMBO JACK 1-MAN Ladder Stand FINISHED LADDER ASSEMBLED PLATFORM RATCHET STRAP SECTION TOP LADDER SECTION CRISS CROSS STRAPS STABILIZER BAR CAM STRAP MIDDLE LADDER SECTION STABILIZER BAR BOTTOM LADDER SECTION LOCKPINS Check for parts online at www.HuntRiversEdge.com or call 800-345-6007...
Page 18: Illustrated Parts Breakdown
Operator's Manual JUMBO JACK 1-MAN Ladder Stand ILLUSTRATED PARTS BREAKDOWN 35 26 29 39 9 mesh hidden for clarity Check for parts online at www.HuntRiversEdge.com or call 800-345-6007...
Page 19 Operator's Manual JUMBO JACK 1-MAN Ladder Stand PARTS LIST ITEM # PART # DESCRIPTION QTY. ITEM # PART # DESCRIPTION QTY. 1ML23 STABILIZER BAR EXTENSION 26813 BOLT M6 X 20 MM 27397 STABILIZER BAR 39 IN 29727 BOLT M6 X 60 MM 28678 SHOOTING RAIL “A”...
Page 20 WE ARE HUNTERS Rivers Edge® Treestands, Inc. Phone: 800-345-6007 1730 Industrial Avenue, PO Box 755 Fax: 715-822-2124 Cumberland, WI 54829 www.HuntRiversEdge.com *All weights, specifications and features are approximate and are subject to change without notice. Due to continuous product improvements, product images may not be exact. Warning labels in some product images may have been removed for photography purposes only.