Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for ALLNIC AUDIO D-3000
Summary of Contents for ALLNIC AUDIO D-3000
- Page 1 D-3000 DIGITAL TO ANALOG CONVERTER OWNER’S MANUAL...
- Page 2 Please read this entire manual before you connect the D-3000 to the other components of your system and the electrical receptacle. Audiomentors(Allnic Audio Marketing company) 3f.
-
Page 3: What Is In The Box
We advise that you keep the box and other packing materials that your D-3000 DAC came in. They will be useful if you sell your D-3000, or in the unlikely event you need to ship the unit for service. SAFETY!! •... -
Page 4: Initial Setup
A. LOCATION, LOCATION, LOCATION Like all audio products using tubes, the Allnic Audio D-3000 needs to be placed on a solid base that is not subject to vibration or sudden shock, and that provides good air circulation around, above and below the unit. - Page 5 Two (2) coaxial digital • To select the input you want to play, rotate the knob on the right of the D-3000’s front panel clockwise and counter-clockwise, or use the appropriate part of the remote control (See the section “The Remote Control”...
-
Page 6: Initial Power On
• turned the volume down or muted your preamplifier To turn on the D-3000, press in the rocker switch on the left side panel near the front of the unit and marked with on and off icons. To turn on the D-3000, press the top of the rocker switch in. Of course, the “Off”... - Page 7 D-3000 is used to playback DSD files, the DSD LED indicator will illuminate, as well as the LED indicator for one or the other of the 176/192 or 352/384 sample rates, indicating the DSD rate. The 176/192 indicator means the input signal is DSD 64, and the 352/384 indicator means the input signal is DSD 128.
- Page 8 If you are using an Apple device as a source or controller, or have any other Apple device nearby, it may also respond to the D-3000 remote control. If you need to use an Apple device at the same time as you are using the D-3000 and cannot move your Apple device out of range of the D-3000 remote control, you should be able to disable the remote control sensor of the Apple device in the device’s...
- Page 9 D-3000, any of its parts, or tubes or replacement tubes resulting from the user changing or attempting to change tubes.
-
Page 10: Warranty
Allnic Audio dealer. For the warranty to be valid, a defective product must be returned to your authorized Allnic Audio dealer for service prior to any unauthorized attempt to repair. Any repair work on an Allnic Audio product not expressly and specifically authorized by your authorized Allnic Audio dealer will void the warranty on the product. - Page 11 Selects the various inputs from right to left on the face of the unit Toggles CONV, conversion to DSD, on and off, i.e., between conversion to DSD and a source’s incoming sample rate, or one of the up-sampling rates (the latter only if you were previously in up-sampling) Toggles UPSAMPLE on and off and when on, cycles through the various up-sampling...
Need help?
Do you have a question about the D-3000 and is the answer not in the manual?
Questions and answers