SAFETY & WARNINGS For bulbs with a weight significantly higher than that of the bulbs for which they are a replacement, attention should be drawn to the fact that the increased weight may reduce the mechanical stability of certain light fixtures may impair contact making and bulb retention.
INSTALLATION This smart bulb is only suitable for E14 Edison screw type light fixtures. It will not fit into any other size or type of light fixture. Refer to the table below for the appropriate removal and installation method. Light Bulb Types The oil from your hands can cause damage to certain types of light bulbs.
Page 5
Step 1: Turn off the power • Ensure the light switch is in the off position before attempting to install or remove a light bulb. • If you are removing an old light bulb, give the bulb a few minutes to cool down before touching it.
Install App Download the “Kogan SmarterHome” app from the Play Store (Android) or App Store (iOS). Register If you do not have a Kogan SmarterHome™ account, register or sign in with a verification code sent by SMS. To register: Tap to enter registration page.
Page 7
Set Device in Pairing Mode Install the bulbs into the appropriate light fitting and power them on. When the device is first turned on, it may automatically enter pairing mode (light flashing rapidly, 2 times per second). If not automatically in pairing mode when powered on, you can manually set the device in pairing mode by turning the light switch on and off 3 times: the bulb will begin gently breathing or flashing rapidly.
Page 8
Add device through network Once registered, tap “+” in the upper right corner of the app’s home page to add a new device through the network. Select the product type from the list of options in the app (Lighting > Bulbs). Ensure that the device is in pairing mode, with the bulb blinking, and tap “Confirm light is rapidly flashing”.
Page 9
Upon successfully confirming pairing mode, enter your Wi-Fi details. It is important that your SmarterHome™ device and the app are connected to the same Wi-Fi network during setup. The device will commence the pairing process and connect to the app. Ensure your Wi-Fi router, mobile phone, and the SmarterHome™...
From the home page of the Google Home app, select the “+” icon to access the ‘Add and manage’ page. Select ‘Set up device’, then under the Works with Google banner, select ‘Have something already set up?’ Select the search bar and type ‘Smarter Home’ to locate the Kogan SmarterHome™ service.
Page 11
Tap ‘Authorise’ to grant Google permission to access the SmarterHome™ app and your devices. From here, you will be prompted to sign into your SmarterHome™ account using either your email or mobile phone number, depending on which method you used to register your account.
Page 12
Tap on any of the devices to view a list of available commands. Note: Please note that Google Home can only control the base/core functions of any compatible SmarterHome™ devices. To make full use of this product’s smart functionality, please use the Kogan SmarterHome™ app.
AMAZON ALEXA CONTROL Note: You will need to have set up an Alexa account prior to linking your Kogan SmarterHome™ device. Adding “SmarterHome” to the Alexa app From the home page of the Alexa app, select the “ ” icon in the top-right and select Skills &...
Page 14
Tap ‘Enable to Use’ to add the Kogan SmarterHome™ skill to Alexa. From here, you will be prompted to sign into your SmarterHome™ account using either your email or mobile phone number, depending on which method you used to register your account.
Page 15
SmarterHome™ account. When your devices have successfully connected to the Alexa app, you will be able to control your Kogan SmarterHome™ devices via Alexa’s voice commands. Note: Please note that Alexa can only control the base/core functions of any compatible SmarterHome™...
OPERATION Power On/Off To quickly power the bulb on or off, tap the power icon to the right of the device name. Reset To reset the device to its default settings, turn the relevant light switch on and off 10 times. Settings Tap on the name of the device to enter the settings menu.
Page 17
White Adjustment Tap on the “White” tab at the top of the screen to enter the white control menu. Adjust the temperature bar left or right to set the colour temperature from warm (3000K) to cool (6500K). Slide the horizontal bar left or right to set the desired brightness level.
Page 18
Scene Tap on the “Scene” tab at the top of the screen. Tap on any of the scene icons to select the desired scene.
Page 19
Schedule Tap on the “Schedule” tab at the bottom right of the screen. Tap on the “Add Schedule” tab at the bottom of the screen. Choose a Start Time (on) or End Time (off). To repeat on certain days of the week tap “Repeat”, or schedule will only occur once.
Page 20
Additional settings Tap the context menu in the upper right corner, represented by the pen icon. Additional features are available in the bulb settings context menu, including renaming and removing devices.
Page 21
Grouping devices From the context menu, tap on “Create Group”. Select the bulbs you want to group then tap “Confirm”. Enter the desired name for the group and tap “Save”.
Page 22
Tap the name of the created group in the device menu. Tap the context menu in the upper right corner, represented by the pen icon. From the context menu, you can rename the group or remove a bulb from the group.
Page 23
Device Sharing Tap on the name of the bulb or group you wish to share from the device menu. Tap the context menu in the upper right corner, represented by the pen icon. Tap on “Share Group”, then “Add Sharing” at the bottom of the Device Sharing screen.
Page 24
Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...