Table of Contents
Advertisement
CAUTION
© Copyright 2016 ABB. All rights reserved.
Disassembly and assembly
Installing cartridge group
Measure and note the axial clearance (A) (see the section on axial
clearance).
If the axial clearance (A) is out of tolerance, an ABB Turbocharger ser-
vice station must be contacted.
Connect oil lines and all air lines in accordance with engine builder's
instructions.
Version with compressor wheel cooling system
Fit the air supply line. (Also see the chapter Preliminary remarks /
Layout and functioning.)
Fit the filter silencer or air suction branch.
Fit the insulation.
Operation Manual / TPL67-C.. - TPL71-C..
8
8.7
Page 97
Advertisement
Table of Contents
