Straight tachometer cable for ams2140, 8-pin m12 connector to male bnc connector. 4 feet long. not compatible with the model 2130. can be used with the battery pack of the ams 404 or for tach signals from protection monitoring panels (6 pages)
High temp armor jacket fep cable, 2-conductor, twisted pair w/drain, shielded with a rightangle high temperature (+356 f) pps conn. with stainless steel ollar and fkm heat shrink strain relief on one end and a blunt cut termination on the other end (6 pages)
Polyurethane cable, 2-conductor twisted pair w/drain, shielded with 2-socket, molded composite connector on one end and bnc plug on the other end with red heat shrink (1") overlapped by white heat shrink (1/2”) on both ends. configurable length (6 pages)
Polyurethane cable, 2-conductor twisted pair w/drain, shielded, 2-socket ms3106 connector w/strain relief (meets mil-c-5015) on one end (ap), 5-socket field-installable m12 connector with pinout for beckoff el3632 daq on other end (sj) (6 pages)
Summary of Contents for PCB Piezotronics 045M29
Page 1
Model 045M29 2-conductor twisted/shielded pair, Aramid cable, 3-ft, 2-pin MIL 7/16-27 jack Installation and Operating Manual For assistance with the operation of this product, contact PCB Piezotronics, Inc. Toll-free: 800-828-8840 24-hour SensorLine: 716-684-0001 Fax: 716-684-0987 E-mail: info@pcb.com Web: www.pcb.com...
Page 2
Returning Equipment – Following the equipment to PCB Piezotronics for these procedures will insure that your repair. User servicing or repair is not returned materials are handled in the recommended and, if attempted, may most expedient manner.
Page 3
PCB Piezotronics, Inc. Warranty – All equipment and repair 3425 Walden Ave. services provided by PCB Piezotronics, Depew, NY 14043 USA Inc. are covered by a limited warranty Toll-free: (800) 828-8840 against defective...
Need help?
Do you have a question about the 045M29 and is the answer not in the manual?
Questions and answers