Table of Contents
Advertisement
Tuning in New Stations
Sorting programme locations
If the location numbers used for programmes stored in your TV and player are different, you can change them
on the player. To do this, move the stations to the right numbers, until they are arranged the way you want.
1
1
Call the player's "SETUP",
choose "PR PRESET" then "PR ALIGN".
2
2
Select the programme to swap.
Confirm by pressing OK button.
Move the station to the desired location number.
Confirm by pressing OK button.
Clearing programme locations
1
1
Call the player's "SETUP",
choose "PR PRESET" then "PR ERASE".
2
2
Select the station (location number) you want to
clear.
Review the picture by pressing [œ œ ] button.
Clear by pressing OK button.
26
All manuals and user guides at all-guides.com
PR ALIGN
PR01ARD
PR08 P-08
PR02 ZDF
PR09 P-09
PR03 P-03 PR10 P-10
PR04 P-04 PR11 P-11
PR05 MTV PR12 ----
PR06 P-06 PR13 ----
PR07 P-07 PR14 ----
PR+/-:ALIGN
:PR VIEW
OK:CONFIRM
SETUP:END
PR ERASE
PR01 ARD
PR08 P-08
PR02 ZDF
PR09 P-09
PR03 P-03
PR10 P-10
PR04 P-04
PR11 P-11
PR05 MTV PR12 ----
PR06 P-06
PR13 ----
PR07 P-07
PR14 ----
PR+/-:SELECT
:PR VIEW
OK:ERASE
SETUP:END
Timer Recording
For timer recordings, clock, date, and stations must be set correctly.
Load a cassette with its safety tab in place and with sufficient free space for the recording.
Normal timer recording
Call the player's "SETUP", choose "TIMER PROGRAM".
1
Decide if you want to record "ONCE", "WEEKLY" or
"DAILY"...
... and confirm.
Type in one after the other:
2
• The programme location number;
• the time the broadcast starts,
• the time the broadcast ends,
• the day of the broadcast, if it is not today.
• Select LP if you wish to make a very long recording .
If you wish to make changes:
Move to the position you want to change using the [œ œ /√ √ ]
3
buttons. Change the setting using the [PR+/- ] or [number]
buttons.
If all setting are ok, press [œ œ or √ √ ], till you see "OK :
CONFIRM" in the bottom line.
Confirm.
Switch your player off.
• Wait a few seconds after typing a one-digit-number.
• If you have made a mistake, move to the position you want to change using the [œ œ /√ √ ]
buttons and change the setting.
• If programme timings overlap, the machine will give a warning message. If you don't
adjust the times, the machine will record the first programme completely then continue
with the second one.
• If there is no sufficient free space for the recording on the cassette the video switches
automatically to "LP" for double recording capacity.
• The recorder will eject cassettes which have the safety tab removed.
• The player will be powered on and record the program at the set time.
• In case the player is powered on after setting of timer recording, the player cannot record
in VCR mode but can record in DVD mode.
HOW OFTEN DO YOU WANT
TO RECORD THIS PROGRAM?
ONCE
WEEKLY(ONCE A WEEK)
DAILY(MON-FRI)
DAILY(MON-SAT)
DAILY(MON-SUN)
PR+/-:SELECT
OK:CONFIRM
SETUP:END
TIMER PROGRAM (ONCE)
PR
--
START TIME
--:--
END TIME
--:--
START DATE
--/--
TAPE SPEED
SP
PR+/-:SELECT(AV1/AV2)
0-9 :SETUP(PR)
/ :CORRECT SETUP:END
TIMER PROGRAM (ONCE)
PR
01
START TIME
18:10
END TIME
20:30
START DATE
20/08(FRI)
TAPE SPEED
LP
PR+/-:SELECT(AV1/AV2)
0-9 : SETUP (PR)
/
:CORRECT
OK:CONFIRM
SETUP:END
27
Advertisement
Table of Contents
