Error List - Canon Bubble Jet Printer i450 Simplified Manual

Table of Contents

Advertisement

ERROR LIST

3.
3.1. Errors by LED Blinking in Orange
User recoverable errors
LED
blinking in
Panel display
orange
2 times
301
3 times
302
6 times
402
7 times
403
8 times
202
11 times
611
612
*1:The error code is stored in the operator / service call history of the EEPROM information.
Error Code
1000
No paper.
1300
Paper jam.
1401
The print head is not
installed.
1405
The print head is not
installed
(EEPROM data of the
print head is faulty.)
1700
Warning: The waste ink
absorber becomes almost
full (to approx. 95% to
100% of the maximum
capacity).
2001
Digital
transmission
error (When the printer
cannot communicate with
a
digital
time-out error occurs.)
2001
Digital
non-supporting
error (When a digital
camera or device other
than a digital camera, not
supporting Direct Printing
is connected to the printer
with the USB cable, the
error occurs.)
5
Error
Set the paper, and press the
Resume/Cancel button.
Remove the jammed paper, and
press the Resume/Cancel button. If
the error is not resolved, check that
no foreign material is inside the
printer.
Install the print head, and close the
access cover.
Re-install the print head, or with the
properly.
print head installed, turn the printer
off and on. If the error is not
resolved, replace the print head.
Pressing the Resume/Cancel button
will exit the error.
(The waste ink absorber full error
occurs at 100% capacity, making it
impossible to perform printing.
camera
Disconnect the USB cable to the
time-out
digital
Resume/Cancel button.
camera,
the
camera
Disconnect the USB cable, and press
device
the Resume/Cancel button.
Solution
camera,
and
press
the

Advertisement

Table of Contents
loading

Subscribe to Our Youtube Channel

Table of Contents