Advertisement
Quick Links
1. Packing List
•
RSU900 or RSU 2.4
•
Power Supply
•
End User Manual
2. Installation
The RSU is a self-installed, plug and play unit, which requires minimum setup operations from the user.
1.
Polarization Indication
2.
ETH link led (Yellow)
3.
Air link led (Green)
4.
Received Signal Indicator Lights
5.
ETH Connector
6.
Power led
7.
DC Power Jack
4
3
2
1
2.1. Before You Start
2)
Make sure your computer is equipped with an Ethernet Network Interface (NIC).
3)
Make sure your computer network configuration is set up according to your Internet Service Provider instructions (typically to
automatically obtain an IP address - DHCP).
4)
Select the appropriate location for the RSU:
•
Locate the RSU near an exterior window.
•
Locate the RSU in such a way that its antenna will face your service provider Access Unit (AU). Avoid any physical obstacles,
which may block the signal.
GigAccess
Self-Install Residential Subscriber Unit
End User Manual
1)
Figure 3-1: General Description for GigAccess™ Self Install RSU
Page 1 of 1
TM
RSU
January 04
5
6
7
Advertisement
Summary of Contents for WaveIP GigAccess RSU900
- Page 1 January 04 GigAccess Self-Install Residential Subscriber Unit End User Manual 1. Packing List • RSU900 or RSU 2.4 • Power Supply • End User Manual 2. Installation The RSU is a self-installed, plug and play unit, which requires minimum setup operations from the user. Polarization Indication ETH link led (Yellow) Air link led (Green)
- Page 2 This device must accept any interference received including interference that may cause undesired operation. Any unauthorized modification or changes to this device without the express approval of WaveIP may void the user’s authority to operate this device. Furthermore, this device intended to be used only when installed in accordance with the instructions outlined in this manual.