Table of Contents
Advertisement
The appliance feels cold
despite drying.
Drying programme is stopped.
I am unable to connect to my
home network.
Home Connect is not working.
Residual water in the conden-
sation container despite the
appliance being connected to
the drain hose*.
* Depending on how the appliance is equipped or the available accessory
--------
Note:
If you cannot rectify the fault yourself by turning the appliance off and then on again,
please contact our after-sales service.~ Page 61
Not a fault. The appliance can dry effectively at low temperatures using a
heat pump.
If the drying programme is stopped due to a power failure, restart the
programme or remove the laundry and spread it out.
Wi-Fi is switched off.To connect to your home network, switch on Wi-
■
Fi. ¡ must appear on the display.
Wi-Fi is switched on but a connection to your home network cannot
■
be established.Check whether your home network is available or try
to connect to your home network again.
You can find solutions to problems with Home Connect at
■
www.home-connect.com.
The availability of the Home Connect functionality depends on the
■
availability of the Home Connect Services (e.g. provision of the app)
in your country. Home Connect Services are not available in every
country – for further information please check: www.home-con-
nect.com.
If the optional drain hose is installed, residual water remains in the con-
densation container due to the appliance's self-cleaning function.
Help with the appliance
en
57
Advertisement
Table of Contents
